User manual HISENSE PDP4211

[. . . ] Part No: IES050148 WELCOME TO THE BRIGHT AND VIVID WORLD OF PLASMA DISPLAY TV Dear customer, Thank you for purchasing this Plasma Display TV. The goal of this manual is to guide you through setting up and operating your TV as quickly as possible. Please read all the safety and operating instructions carefully before you begin. SAFETY CLASS This is an IEC safety class I product and must be grounded for safety. CONTENTS Important Safety Instructions . [. . . ] 2) Press the [CH+/CH-] button to select the item CHANNEL, and press the [ Vol+ ] to enter CHANNEL Menu. 4) Press the [ Vol+/Vol- ] button to fine-tune. SKIP 1) Press the [Menu] button to enter the main Menu. 2) Press the [CH+/CH-] button to select the item CHANNEL, and press the [ Vol+ ] to enter CHANNEL Menu. 4) Press the [ Vol+/Vol- ] button to skip or unskip the present channel. NOTE: The 'skipped' channels cannot be accessed by [CH+/CH-] , but you can access them by digit (direct select) button. -10- Using the TV features CHANNEL EDIT 1) Press the [Menu] button to enter the main Menu. 2) Press the [CH+/CH-] button to select the item CHANNEL, and press the [ Vol+ ] to enter CHANNEL Menu. 6) Press the [CH+/CH-] button to select EXCHANGE, and press the [ Vol+/Vol- ] to exchange Program1 and Program2. 7) Press the [CH+/CH-] button to select COPY, and press the [ Vol+/Vol- ] to copy Program1 to Program2. Using the PICTURE Menu Adjust picturePreset settings POSITION 1) Press the [Menu] button to enter the main Menu. SKIP RF [CH+/CH-] button to select the item PICTURE, 2) Press theINPUT AUTO_SEARCH ] to enter PICTURE Menu. and press the [ Vol+ 3) Press the [CH+/CH-] button to select the item you want to adjust. For example, HUE is disable unless the colour system is NTSC. PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOUR COLOUR TEMP Cool HUE Select Set Previous Using the SOUND Menu Adjust sound settings 1) Press the [Menu] button to enter the main Menu. 2) Press the [CH+/CH-] button to select the item SOUND, and press the [ Vol+ ] to enter SOUND Menu. 5) The adjusted data is stored automatically in the user mode. SOUND VOLUME TREBLE BASS BALANCE NICAM Mono Select Set Previous NICAM 1) Press the [Menu] button to enter the main Menu. 2) Press the [CH+/CH-] button to select the item SOUND, and press the [ Vol+ ] to enter SOUND Menu. If Dual language is detected, then Language 1 is the default sound. -11- Using the TV features Using the CLOCKSETUP Menu Set sleep/wake timer 1) Press the [Menu] button to enter the main Menu. 2) Press the [CH+/CH-] button to select the item CLOCKSETUP, and press the [ Vol+ ] button to enter CLOCKSETUP Menu. NOTE: Only when you turn the timer on will the timer behind be valid. CLOCKSETUP CLOCK SLEEP WAKE ON ON OFF 0 30 Select Set Previous Using the FUNCTION Menu LANGUAGE 1) Press the [Menu] button to enter the main Menu. 2) Press the [CH+/CH-] button to select the item FUNCTION, and press the [ Vol+ ] button to enter function Menu. 3) Press the [CH+/CH-] button to select the LANGUAGE, 4) Press the [ Vol+/Vol- ] button to change OSD language. FUNCTION ENGLISH LANGUAGE CALENDAR > OFF BLACKSCREEN OFF C. C. B ON MOTIONDETECT Menu POS POS7 Scart Control ON ADVANCE Select Set Previous CALENDAR 1) Press the Menu button to enter the main Menu. 2) Press the [CH+/CH-] button to select the item FUNCTION, and press the [ Vol+ ] button to enter function Menu. 3) Press the [CH+/CH-] button to select the CALENDAR, and press the [ Vol+/Vol- ] to enter CALENDAR Menu. 4) Press the [CH+/CH-] button to select your desired item (year, month, day), and press [ Vol+/Vol- ] to adjust the date. [. . . ] Caution: Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet. These chemicals can damage the finish of the cabinet. -15- Appendix Scart connector See Signal Source Selection on page 8 for selecting SCART input. -16- Appendix -17- Appendix Troubleshooting Before calling a service technician, please check the following table for a possible cause of the problem and some solutions. Symptoms TV will not turn on Possible Solutions Make sure the power cord is correctly plugged in, then press [Power]. See SKIP on page 10. No picture, no sound No sound, picture OK Poor sound, picture OK Poor picture, sound OK Unable to select a certain channel Poor colour or no colour The station may have broadcast difficulties. Adjust the HUE and COLOUR in the Menu. The remote control does not operate There may be an obstruction between the remote control and the remote control sensor. [. . . ]