User manual HAWKE 711 DATASHEET

[. . . ] 'G' Approx (Compressed Length) Nickel Plated Hub Compound Deluge Boot Armour Grounding Device Cable Gland/Connector Type 711 Class 1 Division 1 Ø 'B' Entry Thread Ø 'D' Ø 'E' Explosion Proof Application Outdoor or Indoor use. For use with continuous corrugated aluminium, Metal Clad (MCHL) cable. [. . . ] Provides a barrier seal between the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable. Assembly of the cable gland/connector compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure. Provides an outer deluge seal to prevent moisture ingress to the cable armour and enclosure. Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer jacket. 'H' size cable gland/connector available. Contact Hawke International for further details. H 3½" M90 2. 79" 2. 93" 3. 47" 120 3. 07" 3. 52" 4. 33" 4. 18" 4. 84" General Information A - F size metric entry threads are 1. 5mm pitch as standard. (1. 5mm pitch with 15mm length of thread can be supplied) please specify when ordering. All dimensions in inches (except* where dimensions are in millimetres). Two part sealing compound and assembly instructions are supplied with the cable gland. Accessories including locknuts, sealing washers, serrated washers, earth tags, shrouds, adaptors and reducers available. See pages 53 - 57. Technical Data UL Listed for use in Class1, Division 1, Gas Groups A, B, C and D. [. . . ] Marine Approval. For Class 1, Division 2 MC cable applications, the 713 cable gland/connector is available. Details and sizes are the same as the 711. www. ehawke. com Connection Solutions International HWK69 June '07 711 Cable Gland/Connector Cable Acceptance Details Inner Jacket/Cores Outer Jacket Armour Max. [. . . ]