User manual HANNA INSTRUMENTS HI 98331
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HANNA INSTRUMENTS HI 98331. We hope that this HANNA INSTRUMENTS HI 98331 user guide will be useful to you.
Manual abstract: user guide HANNA INSTRUMENTS HI 98331
Detailed instructions for use are in the User's Guide.
[. . . ] Instruction Manual
HI 98331
Direct Soil Conductivity & Temperature Meter
Dear Customer, Thank you for choosing a Hanna product. This manual will provide you with the necessary information for a correct operation. [. . . ] If the instrument is to be returned to Hanna Instruments, first obtain a Returned Goods Authorization Number from the Customer Service department and then send it with shipment costs prepaid. When shipping any instrument, make sure it is properly packed for complete protection.
GENERAL DESCRIPTION
HI 98331 is a special pocket meter expressly designed to directly measure soil conductivity. The meter also measures temperature, and the conductivity readings are compensated for temperature with a sensor incorporated in the HI 73331 penetration probe. The probe is interchangeable, and it can be easily replaced by the user. The conductivity range can be calibrated at one point, and the meter has been designed to be calibrated in liquid.
All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner, Hanna Instruments Inc. , Woonsocket, Rhode Island, 02895 , USA.
Hanna Instruments reserves the right to modify the design, construction and appearance of its products without advance notice. ISTR98331 12/05
SPECIFICATIONS
Range Resolution Accuracy (@ 20 °C) Temperature Compensation Calibration Battery Type Probe (included) Environment Dimensions Conductivity: Temperature: Conductivity: Temperature: Conductivity: Temperature: 0. 00 to 4. 00 mS/cm (dS/m)* 0. 0 to 50. 0 °C 0. 01 mS/cm 0. 1 °C ±0. 05 mS/cm (0. 00 to 2. 00 mS/cm) ±0. 30 mS/cm (2. 00 to 4. 00 mS/cm) ±1 °C Automatic, temperature coefficient (ß) fixed @ 2%/°C 1 point manual 4 x 1. 5V button type HI 7 3 3 3 1 122 mm (4. 5") penetration 0. 0 to 50. 0 °C 163 x 40 x 26 mm (6. 4 x 1. 6 x 1. 0") 150 mm for probe
CALIBRATION
For better accuracy, frequent calibration of the instrument is recommended. In addition, the instrument must be recalibrated whenever: a) The conductivity probe is replaced. Calibration procedure Immerse the tip of the probe in a beaker with HI 70031P 1413 µS/cm solution. The probe should be kept at least 1" from the walls and the bottom of the beaker. [. . . ] To avoid electrical shock, do not use this instrument when voltages at the measurement surface exceed 24 VAC or 60 VDC. To avoid damages or burns, do not perform any measurement in microwave ovens. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HANNA INSTRUMENTS HI 98331
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HANNA INSTRUMENTS HI 98331 will begin.