User manual GARMIN GFL 10 FLUID LEVEL ADAPTER INSTALLATION AND CONFIGURATION INSTRUCTIONS

[. . . ] A Printed in Taiwan Determining an Installation Location When you are selecting a location to install the GFL 10 adapter, consider the following: · During installation, you connect the GFL 10 adapter to the analog gauge (or directly to the fluid-level sensor), and to the NMEA 2000 network. (4. 4 m) of the analog gauge (or the fluid-level sensor) to avoid splicing bare wires. Choose a location between the NMEA 2000 backbone and the analog gauge (or the fluidlevel sensor). If you cannot connect the adapter directly to the NMEA 2000 network, add a drop cable. [. . . ] Connect the drop cable to the T-connector and to the NMEA 2000 connector on the GFL 10 adapter. notiCe: If you have an existing NMEA 2000 network on your boat, it should already be connected to power. Do not connect an additional NMEA 2000 power cable to an existing NMEA 2000 network, because only one power source should be connected to a NMEA 2000 network. GFL10InstallationandConfigurationInstructions Connecting the GFL 10 Adapter to an Existing NMEA 2000 Network GFL10adapter NMEA000device(notincluded) Dropcable(optional-notincluded) T-connector(oneincluded) ExistingNMEA000network Configuring the GFL 10 Adapter notiCe: This section provides specific configuration information for the GFL 10 adapter using your compatible Garmin display device. To access the NMEA 2000 configuration menu on your display device, consult the documentation provided with your display device. Configuring the NMEA 2000 Fluid Type You can indicate the type of fluid that is in the tank with which each GFL 10 adapter is associated. 1. Select an option: · For most Garmin chartplotters, select Review > N2K Fluid Type. · For other Garmin marine devices, select Config > N2K Fluid Type. Select OK. Configuring the Tank Number If your boat has multiple fluid tanks, you can indicate which tank each GFL 10 adapter is associated with. 1. Select an option: · For most Garmin chartplotters, select Review > Tank Number. · For other Garmin marine devices, select Config > Tank Number. Select OK. GFL10InstallationandConfigurationInstructions Configuring the NMEA 2000 Tank Capacity You can indicate the capacity of the fluid tank that the GFL 10 adapter is associated with. 1. Select an option: · For most Garmin chartplotters, select Review > N2K Tank Capacity. · For other Garmin marine devices, select Config > N2K Tank Capacity. Select Done. Calibrating the Fluid Level To use the GFL 10 adapter, you must calibrate the fluid level of the tank that the adapter is associated with, using a minimum of two calibration points. The greater the number of fluid calibration points, the greater the accuracy of the reading on the fluid-level gauge. 1. Select an option: · For most Garmin chartplotters, select Review > Level Calibration > Add Calibration Point. · For other Garmin marine devices, select Config > Level Calibration > Add Calibration Point. Selectthepercentageoffluidcurrentlyinthetank, basedonthetotaltankcapacity. Selectthepercentageoffluidcurrentlyinthetank, basedonthetotaltankcapacity. epeatsteps6through9toaddadditional, optionalfluid-levelcalibrationpoints. R Troubleshooting the Tank Number If multiple GFL 10 adapters are assigned to the same NMEA 2000 fluid type, each adapter is assigned a unique tank number automatically. If the "Invalid NMEA 2000 tank configuration" error message appears, you must assign a unique tank number to each adapter. For example, if two adapters are assigned the NMEA 2000 fluid type value of Live Well and the error message appears, you must assign each adapter a unique tank number. 1. [. . . ] Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. Visit the Garmin Web site (www. garmin. com) for current updates and supplemental information concerning the use and operation of this and other Garmin products. [. . . ]