User manual FRANKE SMP 66 M XS/F

[. . . ] Switching on the first time How to read the cooking table This user manual applies to several models of the device. Thus it may be possible that some of the described features and functions are not available on your specific model. The explanatory images and figures, described in the various sections, are available at the end of the manual. FRANKE reserves the right to make modifications to the product without prior notice. [. . . ] XXThe data can also be automatically acquired by allowing the blinking to continue for 10 seconds. The LEDs for symbols and will remain lit and the oven will switch on at the set time, when only the LED for the symbol will remain lit. At the end of cooking, the ringer will sound for 1 minute; this sound can be stopped by pressing the right knob. Setting the time of day XXTo set the correct time, just press the right knob Three times (the LED for the clock symbol starts blinking), then turn the left knob. 1b, 1c) It enables oven programming in the following modes: ­­ delayed start of cooking with set duration, ­­ immediate start of cooking with set duration; ­­ timer. Setting the digital clock When the appliance has been connected to the mains or after a power failure the display will flash on: , , 0. The time of day can be adjusted with the + and - buttons, while the dot between the hours and minutes flashes. Possible time adjustments can be made by repeating the steps described above. The frequency of the acoustic signal can be changed if a cooking cycle is not programmed (therefore the display shows the time of day). XXPress the + and - buttons (from the time modification menu) together. XXPress Mode or Set to select the menu for modifying the acoustic signal frequency. XXThe acoustic signal frequency can be modified by repeatedly pressing the Mode or Set button; , , ton1", , , ton2", , , ton3" will appear on the display. Manual oven operation Once the time has been set, the programmer automatically switches to manual mode. Starting delayed cooking with set duration XXWhen the time of the day is displayed, press the mode or Set button twice to set a duration. During duration or end time adjustment mode selection, the Auto symbol remains lit. Likewise, the duration of a programme cannot be prolonged once the end time is set. The end time and duration settings define programme start time as follows: start time = end time - duration. After setting the duration and end time, the display still shows the end time. The programme starts when the time of day coincides with the start time: the Auto symbol lights up steadily and the symbol starts flashing. If only the end of cooking time is selected (the duration is = 0), cooking starts and the display shows the countdown. The Auto symbol remains lit during the wait for delayed start and for the entire duration of cooking. The symbol flashes during the wait for delayed start and remains fixed when cooking starts. [. . . ] Specify: ­­ the type of fault; ­­ the appliance model (Art. This information is given on the appliance dataplate on the warranty certificate. The symbol on the product or on the packaging indicates that the device must not be disposed of in the domestic waste. By disposing of the device in a proper way you help to avoid harmful consequences to environment and health. [. . . ]