User manual FOSTEX XR-5

[. . . ] . WAV file import/export via internal CD-RW ADAT Mixer Mode ­ when using PC/Mac-based audio/midi software and an ADAT audio card, the XR-5 can be used as a full function mixer with its high-quality mic amps, digital EQ and effects processing available for inputs and simultaneous monitoring of the audio on the PC, each with its own fader. [. . . ] Fader Pairing allows channels be paired or ganged in stereo sets i. e. and have the stereo level controlled by the odd numbered respective fader. Channel Solo allows any number of channels to be placed into solo mode quickly and easily. In addition to `individual track' and `8 track' modes, Track Exchange is now enhanced to include `stereo pair' exchange. 1) Sampling frequency Quantization ADC DAC Recording time Number of tracks 44. 1kHz 16bit linear (non compressed) 20bit 64-time oversampling Delta/Sigma 24bit 128-time oversampling Delta/Sigma depends on the HD capacity 16 tracks + 8 additional tracks maximum 16 track play and simultaneous recording Pitch control Crossfade Frequency response Dynamic range T. H. D Crosstalk Equalizer +/- 6% 10ms 20Hz ­ 20kHz 88dB or more 0. 01% (typical) 60dB or more @1kHz <Lo> 400Hz +/- 18dB (Shelving) <Mid> 500Hz ­ 20. 2kHz +/-18dB (Parametric) <Hi> 500Hz ­ 20. 2kHz +/-18dB (Parametric, Shelving) The XR-5 also provides easy-to-operate nondestructive editing with a waveform display and newly added zoom feature for precise waveform editing. The XR-5's superb digital mixer provides 60mm faders for all 16 channels, 3-band EQ with parametric mid & high on all 16 channels, master EQ, channel and master compressors, 8 mic inputs (2 with XLR, inserts & phantom power), ADAT optical I/O, two effect sends and two aux sends per channel (switchable pre/post), and 99mix Scene Memory. Plus, the XR-5 comes with two independent multi effect DSPs including a pre-set library with great sounding algorithms. Affordably priced, easy to use, and with hours of record time, the all-in-one complete digital recording solution just got a whole lot better. [. . . ] Check it out today at your Fostex Dealer. INPUTS/OUTPUTS Input (A-H) Connector 6mm TRS phone jack (unbalanced) Level -50dBV (mic) - +2dBV (line), variable Impedance 50k ohm or more Input (G, H) Connector XLR3-31 type (balanced) +48V phantom power & 6mm TRS phone jack (balanced) Level -50dBu (mic) - +2dBu (line), variable Impedance 1k ohm or more (XLR) 50k ohm or more (phone) Insert x 2 Connector 6mm TRS phone jack (TIP: output / RING: input) Load Impedance 10k ohm or more Input/Output Level -10dBV Monitor Out (L, R) Connector 6mm phone jack (unbalanced) Load Impedance 10k ohm or more Level -10dBV Headphone Connector 6mm stereo phone jack Impedance 8 ohm or more Max. [. . . ]