User manual FOSTEX SPA707
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual FOSTEX SPA707. We hope that this FOSTEX SPA707 user guide will be useful to you.
 |
Manual abstract: user guide FOSTEX SPA707
Detailed instructions for use are in the User's Guide.
[. . . ] With the new software version, after completing saving data to a disc, you can select whether to create another audio CD with same data or to exit the save operation. [. . . ] <The new "Save Completed!" screen>
To continue the save operation (to create another audio CD): · Press the [ENTER/YES] key. The SPA707 exits the Setup mode and the display returns to show the Normal screen which was shown just before entering the Setup mode.
To continue the save operation, carry out either procedures below according to the disc used. Insert an blank disc.
After reading the disc, the SPA707 starts the save operation.
When using a recorded disc 1. When the save operation is completed, "Save Completed!" is shown and the disc is ejected. To continue the save operation (for making an audio CD), repeat the same procedure as above. To eject the disc, use the [JOG] dial (or the [CURSOR >] key) to highlight "Eject" then press the [ENTER/YES] key.
To continue the save operation (for making an audio CD), repeat the same procedure.
© PRINTED IN JAPAN FEB. [. . . ] To continue the save operation (for making an audio CD), repeat the same procedure as above. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE FOSTEX SPA707
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual FOSTEX SPA707 will begin.