User manual FOSTEX AP2090

[. . . ] Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. Grounding or Polarization - The precautions that should be taken so that the grounding or polarization means of an appliance is not defeated. Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. [. . . ] Spilling of water or dropping of metal pieces into the appliance will result in fire and/or electrical shock. · Under no circumstances, must an attempt be made to disassemble, repair and/or alter the appliance. · No contact with the AC plug must be made after lightning has started. · No heavy objects must be placed on the AC cord nor the cord be routed under the appliance. Damage to the cord will occur resulting in fire and/or electrical shock. · The AC cord must not be damaged, modified, twisted, pulled and/or heated. Otherwise, the cord will be damaged resulting in fire and/or electrical shock. · No power voltage different from that labeled on the appliance or specified in this owner's manual must be applied. · Avoid placement of the appliance in smoky or steamy places including unusually humid or dusty places. · The AC cord must not be routed near heat emitting appliances. Otherwise, the cord jacket may melt resulting in fire and/or electrical shock. · The use of HP sound reflectors provides an ideal internal sound processing means for elimination of natural vibration developing within the speaker enclosures. · Power amplifiers capable of delivering 50W/50W output are provided for the bi-amplifier driving system for the woofer and tweeter. · The low frequency filter switch and tweeter level control are provided, allowing frequency response compensation. · The amplifier system is capable of accepting balanced (XLR) or unbalanced (phone) input. · By employing an HP diaphragm and dome tweeter, a wide listening area that no other monitor system can match is obtained. Names and functions 1. Extended time of use will result in a rise of temperature. 2 1 3. Please refer to the descriptions given on the next page for optimal use. 4. Tweeter level control 3 4 5 6 7 8 9 Adjusts tweeter level within a +/- 3dB range. Please refer to the description given on the next page for optimal use. 5. Low-frequency filter selector Adjusts low frequency characteristics (around 55Hz range) within a +/- 2dB range. Unbalanced input terminal (Phone jack) Accepts -10dBV unbalanced input. 7. [. . . ] We recommend to use it for transportation and keeping. <General> Dimensions : 187 (W) x 280 (H) x 305 (D) mm Weight : Approx. 9. 6 kg Power supply : 120VAC 60Hz, 230V ~ 50/60Hz Power consumption : 51W 280 305 187 7 Declaration of EC Directive This equipment is compatible with the EMC Directive (89/336/EEC) - Directive on approximation of member nation's ordinance concerning the electromagnetic compatibility and with the Low Voltage Directive (73/23/EEC) - Directive on approximation of member nation's ordinance concerning electric equipment designed to be used within the specified voltage range. The Affect of Immunity on This Equipment The affect of the European Specification EN50082-1 (coexistence of electromagnetic waves - common immunity specification) on this equipment are as shown below. In the electrical fast transient/burst requirements, surge, conducted disturbances by radio-frequency fields, power frequency magnetic field, radiate electromagnetic field requirements and static electricity discharging environment, this could be affected by generation of noise in some cases. FOSTEX DISTRIBUTORS LIST IN EUROPE * Including non-EU countries (as of January, 2002) <AUSTRIA> NAME: ATEC Audio-u. ADD: Im Winkel 5, A-2325 Velm, Austria TEL: (+43) 2234-74004, FAX: (+43) 2234-74074 <ITALY> NAME: Proel S. ADD: Zona Artigianale 64047 - Sant'Omero (Teramo), Italy TEL: (+39) 0861-81241, FAX: (+39) 0861-887862 <BELGIUM> NAME: EML Sound Industries NV ADD: Bijvennestraat 1A, B3500 Hasselt, Belgium TEL: (+32) 11-232355, FAX: (+32) 11-232172 <THE NETHERLANDS> NAME: IEMKE ROOS AUDIO B. [. . . ]