User manual FOSTEX 80
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual FOSTEX 80. We hope that this FOSTEX 80 user guide will be useful to you.
Manual abstract: user guide FOSTEX 80
Detailed instructions for use are in the User's Guide.
[. . . ] [. . . ] Instructions for installing the 80
Follow the procedure below for installing the optional 80 (AATON interface) to the PD-6.
<Note> Before installing the 80, make sure to turn off the power of the unit (i. e. unplug the connector of the AC adaptor, or remove the internal battery. )
<Step 1>
Unfasten the screws for fixing top panel, front panel, bottom panel and right side panel in order (see figures 1 through 4 below).
Top panel (7 screws)
<Figure 1>
Back side (3 screws)
Bottom panel Bottom side (7 screws) Back side (3 screws)
<Figure 2>
1
Hex nut
Front panel (2 screws)
<Figure 3>
Hex nut
Right side panel (11 screws)
Hex nut
<Figure 4>
<Step 2>
Remove the top and bottom panels. Use the crow washer and hex nut to fix the 80 firmly.
hex nut connector
cable Position for fitting the 80 side panel crow washer
<Figure 6>
<Step 4>
Connect the connector of the 80 to the "J1004" connector on the PCB main board (see figure 7).
"J1004" connector
<Figure 7>
<Step 5>
After fitting the 80 and making connection, reassemble the panels in the reverse order of disassembly.
3 [. . . ] [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE FOSTEX 80
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual FOSTEX 80 will begin.