User manual FOCAL K2 POWER 130 KF

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual FOCAL K2 POWER 130 KF. We hope that this FOCAL K2 POWER 130 KF user guide will be useful to you.


FOCAL K2 POWER 130 KF : Download the complete user guide (507 Ko)

Manual abstract: user guide FOCAL K2 POWER 130 KF

Detailed instructions for use are in the User's Guide.

[. . . ] butyl moulded rubber surround suspension : excellent reliability even in the most extreme climates. TN 47 with inverted dome tweeter : inverted dome formed from titanium treated Tioxid 5 material. Due to constant technological advances, Focal reserves its right to modify specifications without notice. Tweeter installation The TN 47 tweeter has been designed for flush mounting or surface mounting positioning, using the two fixing kits provided. [. . . ] These drive units should be fixed and sealed to the baffle or location panel. For added performance and to better reduce such unwanted vibrations and any other acoustical losses, we recommend the use of "Plain Chant". Easily positioned behind the woofer, on the metal work of the vehicle, "Plain Chant" soaks up vibrations as well as acoustic reflections. Beforehand always ensure that enough space is available for the magnet assembly so that it doesn't interfere with safety mechanisms or any other parts. In the case of not using the grilles supplied, it is important to ensure the speakers fit correctly. Ensuring there is enough depth behind the speaker has already been explained, but thought must also be given for the forward movement of the cone and surround assembly. The woofers from the K2 Power range can also be placed low in the "kick-panels" (fig. Woofer fixing Either cut the required hole or use the pre-fitted space. Where necessary, carefully push in the four fixing clips to fit together with the fixing screws. Carefully place the fixing ring, ensuring it lines up with the holes or fixing clip positions (fig. Add a small amount of glue where necessary so it remains in the correct position (lined up with the holes). Lower the drive unit above the fixing ring, so it remains in the correct position (lined up with the holes). Now lower the drive unit and screw in place with the four screws provided. Crossover installation Before you start, it is necessary to remove the clear plastic lid. Remove it, by pushing gently on the two shortest sides of the clear plastic lid. Never use a screwdriver to prise off the lid, otherwise damage might occur and will not be covered by the warranty. Always ensure the crossover is installed in a dry, vented and not damp area. 2-Way kits connecting up Connect the output from the amplifier into the input of the crossover "INPUT". Finally always ensure the tweeter and woofer are connected in phase correctly and the polarities are respected "+" to "+", and "-" to "-". If not done correctly a "hole" or "peak" may result due to a shift in phase. [. . . ] This running-in period should be used for a few weeks, to gain the full potential. After which, the excellent performance of your K2 Power products will be fully appreciated. Conditions of guarantee All Focal loudspeakers are covered by guarantee drawn up by the official Focal distributor in your country. Your distributor can provide all details concerning the conditions of guarantee. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE FOCAL K2 POWER 130 KF




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual FOCAL K2 POWER 130 KF will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.