User manual FLYMO MINI TRIM

[. . . ] Only use the product in the manner and for the functions described in these instructions. Never operate the product when you are tired, ill or under the influence of alcohol, drugs or medicine. [. . . ] Do not operate whilst people especially children or pets are in the area. On slopes, be extra careful of your footing and wear non-slip footwear. Never operate the trimmer with damaged guards or without guards in place. Keep hands and feet away from the cutting means at all times and especially when switching on the motor. Do not lean over the trimmer guard whilst trimming or edging - objects may be thrown by the cutting line. Remove the plug from the mains: - before leaving the trimmer unattended for any period; - before clearing a blockage; before checking, cleaning or working on the applance; - if you hit an object. Do not use your trimmer until you are sure that the entire trimmer is in a safe operating condition; - if the trimmer starts to vibrate abnormally. Keep all nuts, bolts and screws tight to be sure the trimmer is in safe working condition. Only use replacement parts and accessories recommended by Husqvarna UK Ltd. After any maintenance in dealing with the cutting line, always return the product to its normal operating position before switching on. Awareness of the environment must be considered when disposing of `end-of-life' product. If necessary, contact your local authority for disposal information. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. [. . . ] The maximum A weighted sound pressure level LpA at the operator's position, recorded on a sample of the above product(s) corresponds to the Level given in the table. The maximum hand / arm vibration weighted value measured according to EN ISO 5349 on a sample of the above product(s) corresponds to the Value given in the table. [. . . ]