User manual FLYMO CT250

[. . . ] Stop the trimmer immediately if you are approached. 10m The use of eye protection is recommended to protect against objects thrown by the cutting line. General 1. Never allow children or people unfamiliar with these instructions to use the trimmer. Only use the trimmer in the manner and for the functions described in these instructions. Never operate the trimmer when you are tired, ill or under the influence of alcohol, drugs or medicine. [. . . ] Switch charger off at the wall socket before connecting or disconnecting the trimmer to the wall bracket. It is recommended that the wall bracket (G2) should be mounted on a smooth, vertical and internal wall which is strong enough to hold the weight of the product, in a well ventilated area between 5°C and 25°C. Ensure that when the trimmer is attached the bottom of the trimmer is within 4 inches (100 mm) of the ground, this will make it easier to hang the trimmer and will also ensure that the wall bracket is within easy reach of an electric socket to allow the charger to be plugged in. Fix wall bracket securely to the wall with the plugs and screws provided. Your cordless trimmer can now be attached to the wall bracket for charging. G 1 1. 2. 3. 2 4. 5. (GB) ASSEMBLY Initial charging procedure and re-charging your cordless trimmer Initial Charging Procedure 1. Ensure the trimmer is correctly located into the wall bracket (G2) and the charge connector (H1). If the line does not feed see Fault Finding Hints for further information. 2. line cutter 3. 4. 7 How to trim and edge To start your trimmer 1. To start, press lock-off button (M1), squeeze the switch lever (M2), release lock-off button. Line is fed out automatically every time the trimmer head stops rotating and returns to operating speed. To convert to edging mode, depress locking button and twist head anti-clockwise until arrow lines up with "EDGE". Rest edger on roller for extra stability and line up with edge of lawn. To return to trimming mode, depress locking button and twist head clockwise until arrow lines up with "TRIM". See Fig S. M 1 N 2 O P Q R S (GB) USE Spool Cap To remove spool cap 1. Failure to do so may prevent the cap being securely located in the spoolholder. Align the two latches on the cap with the two windows in the spoolholder, then press down into the locked position. Ensure the two cap release latches are clearly visible and are fully engaged with the windows in the spoolholder. Check that the cap is correctly fitted by trying to remove it without depressing the two latches. T cap release latches U cap spool spoolholder manual line feed button eyelet 8 Nylon Line V To manually feed the nylon line If required, line can be fed out manually. To operate, gently pull on the line whilst at the same time alternately pressing and releasing the button, on the side of the spoolholder. Replacement nylon line is available from most Flymo/Partner stockists. You can buy it either as spool and line complete, or as nylon line only. Unwind approximately 100mm of line and feed this through eyelet, see fig W, then drop the spool into spoolholder smooth side uppermost. [. . . ] 1998 Signed at NEWTON AYCLIFFE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1998 Signed at NEWTON AYCLIFFE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1998 Certificate of Conformity / Certificat de Conformite I, THE UNDERSIGNED/JE SOUSSIGNÉ: P. HOWELLS OF FLYMO/PARTNER, A DIVISION OF ELECTROLUX OUTDOOR PRODUCTS LIMITED, AYCLIFFE INDUSTRIAL ESTATE, NEWTON AYCLIFFE, COUNTY DURHAM DL5 6UP ENGLAND Certify that the Trimmer/Atteste que le taille-herbe 1. [. . . ]