User manual EPSON WORKFORCE DS-30 SETUP GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual EPSON WORKFORCE DS-30. We hope that this EPSON WORKFORCE DS-30 user guide will be useful to you.


EPSON WORKFORCE DS-30 SETUP GUIDE: Download the complete user guide (622 Ko)

Manual abstract: user guide EPSON WORKFORCE DS-30SETUP GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time. A form for the reader’s comments is provided at the back of this publication. If the form has been removed, comments may be addressed to Lexmark International, Inc. [. . . ] The following sections contain guidelines for choosing the correct print material for your printer. Paper For the best print quality, use 75 g/m2 (20 lb) xerographic, grain long paper. Try a sample of any paper you are considering using with the printer before buying large quantities. When loading paper, note the recommended print side on the paper package, and load paper accordingly. See “Loading Print Material” on page 124 for detailed loading instructions. The following papers are not recommended for use with your printer: • Paper with a rough or heavily textured surface • Coated papers, such as erasable bond • Preprinted papers manufactured with chemicals that may contaminate the printer • Multiple-part forms • Synthetic papers • Thermal papers • Recycled paper having a weight less than 75 g/m2 (20 lb) Letterhead Preprinted papers such as letterhead must be able to withstand temperatures up to 200°C (392°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner or the silicone in the fuser. Inks that are oxidation-set or oil-based should meet these requirements; latex inks might not. 118 Chapter 4: Using Print Materials Transparencies You can feed transparencies from the 250-sheet input tray or the multipurpose feeder. Try a sample of any transparencies you are considering using with the printer before buying large quantities. When printing on transparencies, be sure to set the PAPER TYPE to Transparency from the printer driver, and from either the operator panel or from MarkVision to avoid damaging your printer. ) of the edge of the label, of the perforations, or between die-cuts of the label. € Do not use label sheets that have adhesive to the edge of the sheet. Adhesive material will contaminate your printer and could void your warranty. ) strip should be removed on the leading and driver edge, and a non-oozing adhesive should be used. ) strip from the leading edge to prevent labels from peeling inside the printer. • Portrait orientation is preferred , especially when printing bar codes. € You may feed vinyl labels from the 250-sheet input tray and the multipurpose feeder. After continuously printing approximately 10, 000 pages of labels (or each time you replace the print cartridge), complete the following steps to maintain printer feeding reliability: 1 2 3 Print 5 sheets of paper. Print Material Guidelines 121 Card Stock Guidelines Card stock is single ply, and has a large array of properties, such as the orientation of paper fibers and texture, that can significantly affect the print quality. Try a sample of any card stock you are considering using with the printer before purchasing a large quantity. See page 116 for information on the preferred weight of print materials. [. . . ] A printer state in which the printer can receive, process, and print data. A measure of the sharpness of a printed image, expressed in the number of dots per inch (dpi). A font whose characters are stored only as outlines so it is easy to change (or scale) the size of the characters (measured in points). A downloadable font that appears the same on the computer screen as it does on a printed page. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE EPSON WORKFORCE DS-30




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual EPSON WORKFORCE DS-30 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.