User manual ELECTROLUX Z6060
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ELECTROLUX Z6060. We hope that this ELECTROLUX Z6060 user guide will be useful to you.
Manual abstract: user guide ELECTROLUX Z6060
Detailed instructions for use are in the User's Guide.
[. . . ] For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Thank you for having chosen an Electrolux Powerboost vacuum cleaner. This means that with your specific model, some accessories may not be included. In order to ensure the best results, always use original Electrolux accessories. [. . . ] Replacement of the exhaust filter ( Microfilter ) 26 Open the filter's lid and fold up, remove the dirty filter 27 Insert a new filter and close back the lid.
The vacuum cleaner does not start 1 Check that the cable is connected to the mains. Water has entered the vacuum cleaner It will be necessary to replace the motor at an authorised service centre. Damage to the motor caused by the penetration of water is not covered by the warranty.
Use the nozzles as follows:
Carpets: Use the carpet/hard floor nozzle with the lever in position (18). Hard floors: Use the carpet/hard floor nozzle wit the lever in position (19). Crevices, corners, etc. : Use the crevice nozzle (7).
Cleaning the hose and nozzle
The vacuum cleaner stops automatically if the nozzle, tube, hose or filters and dust bag becomes blocked. In such cases, disconnect from mains and allow to cool for up to 60 minutes. Cleaning tubes and hoses 28 Use a cleaning strip or similar to clear the tubes and hose. 29 It may also be possible to remove the obstruction in the hose by squeezing it. However, be careful in case the obstruction is caused by glass or needles caught inside the hose. Note: The warranty does not cover any damage to the hose caused by cleaning it. Cleaning the floor nozzle 30 To avoid deterioration of suction power, frequently clean the carpet/hard floor nozzle. Cleaning the turbo nozzle* 31 Disconnect the nozzle from the vacuum cleaner tube and remove entangled threads, etc. 32 In case the turbo nozzle stops working, open the cleaning lid and remove any objects that obstructs the turbine to rotate freely.
Electrolux declines all responsibility for all damages arising from any improper use of the appliance or in cases of tampering with the appliance. For more informations visit our web site: www. electrolux. co. uk
· · ·
In wet areas. A safety device is fitted which prevents the cover closing without a dustbag. The above can cause serious damage to the motor damage which is not covered by the warranty. [. . . ] Close the lid.
All service and repairs must be carried out by an authorised service centre. Always keep the vacuum cleaner in a dry place.
9 10 11 12 13
Check that the dustbag and motor filter are in place. Insert the hose until the catch clicks to engage (press the catch to release the hose). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ELECTROLUX Z6060
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ELECTROLUX Z6060 will begin.