User manual DYNACORD VL 212 DATASHEET

[. . . ] Nominal impedance Rated power RMS Program power Peak power SPL 2, 83 V / 1m 2W / 4 Ohm Max. [. . . ] The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies two rugged DND 12350 transducers are used. the in-line topology guarantees excellent pattern control even for the low-mid frequency range. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1. The VL212 can be used in passive fullrange mode and can be switched from the outside to `biamped' operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e. The VL212 can be used as a general purpose stand-alone fullrange cabinet and as a satellite or delayed system cabinet in larger set ups. Every transducer is protected against thermal overload with an electronic circuit called VOICE COIL TRACKING PROTECTION and halogen protectors. [. . . ] The connector panel uses two 4-pole Speakon connectors (INPUT/ THRU) for a safe connection and easy daisy-chaining to other cabinets. [. . . ]