User manual DYNACORD FX12 DATASHEET
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DYNACORD FX12. We hope that this DYNACORD FX12 user guide will be useful to you.
 |
DYNACORD FX12 DATASHEET: Download the complete user guide (1245 Ko) |
Manual abstract: user guide DYNACORD FX12DATASHEET
Detailed instructions for use are in the User's Guide.
[. . . ] Cabinet Configuration Operating Mode Nominal impedance Rated power RMS Program power SPL 2, 83 V / 1m 1 W / 8 Ohm Max. [. . . ] In case of a potential thermal overload the power applied to the speakers is reduced to a safe level. Power amps up to 1200W 8 Ohms can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. the VOICE COIL TRACKING PROTECTION exhibits `soft' switching characteristics , so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value. All corner joints and braces are grooved and glued in order to reduce cabinet resonances to a minimum. The connector panel uses two 4-pole Speakon connectors (Input/Output) for safe connection and easy chaining to the next loudspeaker. [. . . ] 4 integrated rigging tracks and 2 webbing strap-points can be used for easy `flying' of the FX 12 cabinets. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DYNACORD FX12
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DYNACORD FX12 will begin.