User manual DIGITECH TSR24S

[. . . ] Private household in the 25 member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one). For Countries not mentioned above, please contact your local authorities for a correct method of disposal. By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health. conforms to the following Product Specifications: Safety: EMC: Supplementary Information: The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC and the EMC Directive 2004/108/EC. Sandy Parkway Sandy, Utah 84070, USA Date: January 02, 2009 European Contact: Your local DigiTech Sales and Service Office or Harman Music Group 8760 South Sandy Parkway Sandy, Utah 84070 USA Ph: (801) 568-8800 Fax: (801) 568-7583 Table of Contents Section One - Introduction Getting Acquainted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Select the Pickup row and use Knob 4 to adjust the Preset Level. 16 Anytime a stored value within a preset is changed, the Store button LED lights up. Changing presets, or turning the power off before storing any changes, erases any changes made and the TSR24S will revert to the stored values for the preset. Storing/Copying/Naming a Preset Once the preset has been modified to your liking, you may store your settings to any of the 60 User preset locations (presets 1-60). The following steps outline the procedure for storing changes to a preset or copying a preset to a different location: 1. The Store button LED blinks and the first character in the Display flashes, indicating that you can now name your custom creation. Use Knob 1 to select the alpha-numeric character and Knob2 to select the next character location. 1. Once the desired name is shown in the display, press the Store button again to enter the second stage of the storing process. Select the User preset location where your new sound will reside using the Up and Down Footswitches. The display alternates between showing the preset name and User preset number about to be overwritten. 3. The procedure for copying one preset to another preset location is the same. Use the Footswitches to select the preset that you want to copy, then follow steps 1-4 for storing a preset as described above. Press either Edit button at any time to abort the Store procedure. 18 Section Three - Models and Parameters About the Models The TSR24S can be thought of as several different "virtual" amplifiers and individual, high-tech stompboxes in a single programmable package. You can, however, change the Cabinet model after selecting an Amp model. 23 57chmp - Based on a `57 Fender® Tweed Champ® 57dlux - Based on a `57 Fender Tweed Deluxe 59BMAn - Based on a `59 Fender Tweed Bassman® 65twin - Based on a `65 Fender Blackface Twin Reverb® 65dlxr - Based on a `65 Fender Blackface Deluxe Reverb® 68plex - Based on a `68 Marshall® 100 Watt Super Lead (plexi) 45 jtm - Marshall® `65 JTM-45 head jmppnl - Marshall Super Lead ("jumped" channels) 77mstr - Based on a `77 Marshall Master Volume 800jcm - Based on an `83 Marshall JCM800 900jcm - Based on a `93 Marshall JCM900 VXac15 - Based on a `62 Vox® AC15 topbst - Based on a `63 Vox AC30 Top Boost hiwtag - Based on a `69 Hiwatt® Custom 100 DR103 mark2c - Based on an `81 Mesa Boogie® Mark II C rectfr - Based on an `01 Mesa Boogie Dual Rectifier match - Based on a `96 MatchlessTM HC30 soldno - Soldano SLO-100 digslo - DigiTech® Solo digmtl - DigiTech Metal digbrt - DigiTech Bright digcln - DigiTech Clean diggan - DigiTech Gain ACdred - Dreadnaught acoustic direct - No amp model DigiTech is a trademark of Harman International Industries, Inc. Other product names modeled in this product are trademarks of their respective companies that do not endorse and are not associated or affiliated with DigiTech or Harman International Industries, Inc. They are trademarks of other manufacturers and were used merely to identify products whose sounds were reviewed in the creation of this product. 24 Cabinet-Knob2 selects the speaker Cabinet model. chmp18 - Based on a 1x8 `57 Fender® Tweed Grn412 - Based on a 4x12 Marshall 1969 Slant Champ® w/ Celestion 25W Greenbacks vtg412 - Based on a 4x12 Johnson® Straight w/ dlx112 - Based on a 1x12 `57 Fender Tweed Deluxe® Celestion Vintage 30's twn212 - Based on a 2x12 `65 Fender Blackface digslo - 4x12 DigiTech® Solo Twin Reverb® digbrt - 2x12 DigiTech Bright digmtl - 4x12 DigiTech Metal brt212 - Based on a 2x12 `63 Vox® AC30 Top digrck - 4x12 DigiTech Rock Boost w/ Jensen® Blue Backs digalt - 4x12 DigiTech Alt Rock bmn410 - Based on a 4x10 `59 Fender Tweed digvtg - 4x12 DigiTech Vintage Bassman® direct - No cabinet model cls412 - Based on a 4x12 Marshall® 1969 Straight w/ Celestion® G12-T70 DigiTech and Johnson Amplification are trademarks of Harman International Industries, Inc. Other product names modeled in this product are trademarks of their respective companies that do not endorse and are not associated or affiliated with DigiTech or Harman International Industries, Inc. They are trademarks of other manufacturers and were used merely to identify products whose sounds were reviewed in the creation of this product. AmpGain-Knob3 adjusts the Gain (distortion) for the selected Amp model (not available for Acoustic). Amp Level - Knob 4 adjusts the Level (volume) of the selected Amp model. The Level parameter ranges from 0 to 99. 25 EQ The TSR24S's EQ helps further shape your tone with Bass, Midrange, and Treble controls. To help get you started, there are four preset EQ curves: Mid Boost (midbst), Scoop (ScooP), Bright (Bright), and Warm (WarM) that can be selected using Knob 1. EQ Model - Knob 1 selects between 4 different EQ modes (Mid Boost, Scoop, Bright, and Warm), each with different frequency centers for Mid and Treble. Mid Freq (X-EditTM only) - This parameter selects the frequency that the Mid parameter adjusts. [. . . ] The procedure for linking a parameter to the Expression Pedal is as follows: 40 1. Press either Edit button until the Expression row has been selected (indicated by the LED lighting on the Expression row). See page 45 for a complete list of parameters that can be linked to the Expression Pedal. Rotate Knob3 to select the minimum (heel) value the assigned parameter will reach with the Expression Pedal in the toe up position. [. . . ]