User manual DENON DCD-2000AE

[. . . ] No naked flame sources, such as lighted candles, should be placed on the apparatus. Please read the operation instructions thoroughly in order to acquaint yourself with the Super Audio CD player and achieve maximum satisfaction from it. Be sure to keep these instructions for future reference, should any questions or problems arise. Please check to make sure the following items are included with the main unit in the carton: q w e r t y Remote control unit (RC-997) . [. . . ] If the batteries should leak, carefully wipe off the fluid from the inside of the battery compartment, then insert new batteries. When operating the remote control unit, point it at the remote control sensor as shown in the figure. The remote control unit can be used from a direct distance of approximately 8 meters. This distance will be shorter, however, if there are obstacles in the way or if the remote control unit is not pointed directly at the remote control sensor. The remote control unit can be operated at a horizontal angle of up to 30° with respect to the remote control sensor. nOTE: · It may be difficult to operate the remote control unit if the remote control sensor is exposed to direct sunlight or strong artificial light. Do not press the buttons on the main unit and on the remote control unit at the same time. If a disc is loaded when the power is turned on, playback starts automatically. Press again to set to the "OFF" position and turn the power off. When pressed while the disc holder is open, the disc holder closes and playback starts. The disc holder can also be closed by pressing the play/pause button ! When a CD is loaded or the Super Audio CD's CD layer mode is set, the Advanced AL24 Processing circuit (which reproduces analog waveforms) is activated and this lights. In the PURE DIRECT mode, you can't use the DISPLAY button on the remote control unit function. This sensor receives the infrared light transmitted from the wireless remote control unit. For remote control, point the supplied remote control unit RC-997 towards this sensor. Press this button to move the pickup forward to the beginning of the next track. Press this button to return the pickup to the beginning of the present track. @4 Displays the title, track number and elapsed time during @2 This lights in the random play mode. Remote control unit q Disc holder open/close button (5) w DIRECT button e PROGRAM button r Number buttons (0 ~ 9) t SUPER AUDIO CD SETUP button y DISPLAY button u TITLE button i RANDOM button o Automatic search reverse button (8) !9 Automatic search forward button (9) @0 Manual search forward button (7) @1 Stop button (2) mEMO · If the automatic search forward button (9), automatic search reverse button (8) or +10 button are held in, the function of these button will be repeated. [. . . ] If you program the wrong track, press the CLEAR button, and then program the right track. (The last track in the program is erased each time the CLEAR button is pressed. nOTE: · The sound may be interrupted momentarily when resuming normal playback from the manual search mode. Playing the tracks in random order (Remote control unit only) [Random play] Use this function to play all the tracks on the disc once in random order. [. . . ]