User manual DENON AVR-590

[. . . ] This receiver supports not only Dolby TrueHD, DTS-HD Master Audio and other HD Audio formats but also Dolby Pro Logic IIz for enhanced vertical and horizontal spatial performance at the front, the essence of 3D acoustics complementing the excitement of 3D video. [. . . ] You can check the status of each setting, such as the volume level when you're adjusting the volume, or the name of the input source when switching input sources. · Minimum Signal Path for clear audio and video signal The "simple and straight" design concept has been thoroughly implemented in the signal paths to contribute to immaculately clean audio and video playback. Signal paths are as short as possible to keep signal degradation in the audio and video circuitry to an absolute minimum. · Featuring 3D pass-through technology By connecting a 3D-compliant Blue-ray disc player and 3Dcompliant TV to the AVR-590, you will have a 3D home theatre where you can enjoy high-definition sound and video on a level you've never experienced before. · Newly developed pre memory remote control handset with Glo-Key · Remote Setup Guidance · Three Quick Select buttons · Auto surround mode · Sleep timer function · Audio Delay function (max. 6 frames or 200 msec) · Muting level settings (Full/-40dB/-20dB) · Supports HDMI 1. 4a with 3D, Audio Return Channel, Deep Color, "x. v. Color" , Auto Lipsync and HDMI control function When you connect the AVR-590 to a TV with a single HDMI cable, it supports Audio Return Channel (ARC) (*1) that can play back the TV audio in surround sound. Until now, if you wanted to enjoy surround sound from a TV, you needed to use an optical digital cable or coaxial digital cable to bring sound from the TV to the A/V receiver. Front L/R 90 W + 90 W (8 ohms, 20 Hz - 20 kHz, THD 0. 08 %) 125 W + 125 W (6 ohms, 1 kHz, THD 0. 7%) Centre 90 W (8 ohms, 20 Hz - 20 kHz, THD 0. 08 %) 125 W (6 ohms, 1 kHz, THD 0. 7%) Surround L/R 90 W + 90 W (8 ohms, 20 Hz - 20 kHz, THD 0. 08 %) 125 W + 125 W (6 ohms, 1 kHz, THD 0. 7%) Surround Back L/R 90 W + 90 W (8 ohms, 20 Hz - 20 kHz, THD 0. 08 %) 125 W + 125 W (6 ohms, 1 kHz, THD 0. 7%) Preamplifier section Input sensitivity/impedance 200 mV / 47 k/kohms Frequency response 10 Hz ~ 100 kHz -- +1, ­3 dB (DIRECT mode) S/N Ratio 100 dB (IHF-A weighted, DIRECT mode) FM section Tuning frequency range Usable sensitivity AM section Tuning frequency range Usable sensitivity General Power supply Power consumption Dimensions (W x H x D) Weight Ports In HDMI Component S-Video Composite (Video) Analog Audio (Tuner included) 87. 5 - 108. 0 MHz 1. 0 µV (11. 2 dBf) Out 522 - 1611 kHz 18 µV Digital Optical Digital Coaxial HDMI Monitor Composite Monitor Audio Preout (SW) Phones AC 230 V, 50 Hz 460 W (Standby 0. 1 W) 434 x 171 x 381 mm 10. 2 kg Other USB port Microphone Port Dock Control Port FM Tuner Antenna AM Tuner Antenna x4 x1 x1 x3 x7 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 *Design and specifications are subject to change without notice. *"Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. *DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc. *HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. [. . . ] iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of Apple Inc. , registered in the U. S. [. . . ]