User manual DENON AVR-3311CI

[. . . ] PLEASE RECORD UNIT SERIAL NUMBER ATTACHED TO THE REAR OF THE CABINET FOR FUTURE REFERENCE" caractéristiques qu'offre cet appareil, lire avec soin ces instructions et bien utiliser l'appareil. Toujours conserver ce mode d'emploi pour s'y référer ultérieurement en cas de question ou de problème. DE SERIE PRIERE DE NOTER LE NUMERO DE SERIE DE L'APPAREIL INSCRIT A L'ARRIERE DU COFFRET DE FAÇON A POUVOIR LE CONSULTER EN CAS DE PROBLEME. " ENGLISH FRANCAIS 2 SAFETY PRECAUTIONS FCC INFORMATION (For US customers) 1. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Set the power switch to this position to turn the power on and off from the included remote control unit. In this position, the power cannot be turned on and off from the remote control unit. 2 Turn on the power. Press the Power ON/STANDBY switch (button). ON / STANDBY (Main unit) (Remote control unit) When pressed, the power turns on and the display lights. The sound is muted for several seconds, after which the unit operates normally. When pressed again, the power turns off, the standby mode is set and the display turns off. 3 3 Select the front speakers. Press the SPEAKER A or B button to turn the speaker on. SPEAKER A B (Main unit) (Remote control unit) · The front speaker A, B setting can be also be changed with the SPEAKER button on the remote control unit. 36 ENGLISH Playing the input source 11 2 5 3 1 3 1 Select the input source to be played. Example: CD FUNCTION 5 (Main unit) (Remote control unit) To select the input source when ZONE2/REC OUT is selected, press the MAIN button then operate the input function selector. 2 MAIN (Main unit) 2 Select the input mode. · Selecting the analog mode Press the ANALOG button to switch to the analog input. ANALOG (Main unit) (Remote control unit) · Selecting the external input (EXT. IN (Main unit) (Remote control unit) · Selecting the AUTO, PCM and DTS modes The mode switches as shown below each time the INPUT MODE button is pressed. AUTO PCM DTS Input mode selection function Different input modes can be selected for the different input sources. The selected input modes for the separate input sources are stored in the memory. IN) setting, press the INPUT MODE (AUTO, PCM, DTS) or ANALOG button to switch to the desired input mode. (See page 37. ) INPUT MODE ANALOG (Main unit) (Remote control unit) · When the input mode is set to the external input (EXT. IN), the play mode (DIRECT, STEREO, STANDARD (DOLBY/DTS SURROUND), 5CH/7CH STEREO or DSP SIMULATION) cannot be selected. NOTES: · In play modes other than the external input mode, the signals connected to EXT. In addition, signals cannot be output from channels not connected to the input jacks. To watch video while listening to sound, select the input source to which the video signal is connected, then set this mode. · If the subwoofer output level seems to high, set the "SW ATT. " surround parameter to "ON". Playing audio sources (CDs and DVDs) The AVR-3311CI/785 is equipped with two 2-channel playback modes exclusively for music. Select the mode to suit your tastes. 1 DIRECT mode Use this mode to achieve good quality 2channel sound while watching images. In this mode, the audio signals bypass such circuits as the tone circuit and are transmitted directly, resulting in good quality sound. DIRECT / STEREO (Main unit) 1, 2 (Remote control unit) 2 STEREO mode Use this mode to adjust the tone and achieve the desired sound while watching images. DIRECT / STEREO 1 2 (Main unit) (Remote control unit) 39 ENGLISH After starting playback [1] Adjusting the sound quality (tone) The tone control function will not work in the direct mode. 1 The tone switches as follows each time the TONE CONTROL button is pressed. TONE CONTROL BASS TREBLE (Main unit) 2 With the name of the volume to be adjusted selected, turn the SELECT knob to adjust the level. 2 31 SELECT (Main unit) 3 If you do not want the bass and treble to be adjusted, turn on the tone defeat mode. TONE DEFEAT · To increase the bass or treble: Turn the control clockwise. (The bass or treble sound can be increased to up to +12 dB in steps of 2 dB. ) · To decrease the bass or treble: Turn the control counterclockwise. (The bass or treble sound can be decreased to up to ­12 dB in steps of 2 dB. ) [2] Listening over headphones The signals do not pass through the bass and treble adjustment circuits, so it provides higher quality sound. (Main unit) 1 Plug the headphones' plug into the jack. The pre-out output (including the speaker output) is automatically turned off when headphones are connected. PHONES NOTE: To prevent hearing loss, do not raise the volume level excessively when using headphones. 1 [3] Turning the sound off temporarily (muting) 1 Use this to turn off the audio output temporarily. [. . . ] Even with the high quality multi-channel signals, the recording time is the same as with conventional DTS surround sources. What's more, DTS 96/24 is fully compatible with the conventional DTS surround format, so DTS 96/24 signal sources can be played with a sampling frequency of 48 kHz or 44. 1 kHz on conventional DTS or DTS-ES surround decoders ( 2). 1: A DVD player with DTS digital output capabilities (for CD/LD players, a player with digital outputs for conventional DTS CDs/LDs) and a disc recorded in DTS 96/24 are required. 2: The resolution is 24 or 20 bits, depending on the decoder. 68 ENGLISH 18 TROUBLESHOOTING If a problem should arise, first check the following. [. . . ]