User manual DENON AVR-2312CI

[. . . ] If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. [. . . ] BD 74 Convenient functions Zone Management function The status of devices connected to the same network can be displayed. Additionally, network menu browsers and volume controls can be performed via the network for the connected devices. This is useful when playing back network services of a device located in a separate room. 3 Press ui to select “Device Control” , and then press ENTER. DENON:[AVR-2312CI] Basic version When the device control mode is started, the network menu of the connected device is displayed on this unit’s television screen. The zone management function can only be used on a combination of DENON devices that are equipped with the zone management function. NOTE • The volume of the selected device can be controlled using CH + (volume up) and CH – (volume down) of this unit, but the volume level is not displayed. € For services that require an account, set the account settings on the target device in advance. Also, some functions of the device may be restricted in “Device Control” mode. Only devices compatible with the Zone Management function can be operated. With the Zone Management function, the network menu screen and playback screen of the target device to be controlled are displayed but playback with this unit is not possible. € For the various settings and operating procedures, see the operating instructions of the media controller being used. € When selecting this unit from the media controller, the name of this unit is displayed at “Friendly Name”. €Friendly Name” can be edited at “Friendly Name Edit” (vpage  110) as desired so that it is easily distinguishable from other devices. € When playback is started from the media controller, this unit’s input source automatically switches to “NET/USB”. Also, when the “Network Standby” setting (vpage  110) is set to “ON”, the power automatically turns on. NOTE When operations related to browsing or playback (play, stop, pause, track search) are performed on this unit while operating the media controller, the connection to the network is disconnected. The network connection is also disconnected when the party mode is started. BD 76 Convenient functions Web control function You can operate this unit using a browser. The top 4 Whenyou want menu is displayed, click on the menu 5 Operate. Asp Favorites Tools Help Basic version GExample 1H Main zone control screen MAIN ZONE POWER MAIN ZONE SOURCE Player Video Network BD ON ON STANDBY OFF 1 the IP address 2 Check(vpage 111). (vGExample 3H) i Note To use the web control function, set the GUI menu “System Setup” - “Network Setup” - “Other” -“Network Standby” setting to “ON” Q2 3 Enter the IP address of this unit in browser’s address box. [. . . ] station server full” or “Connection down” is displayed and station cannot be connected to. € Network’s signal transfer speed is slow or communications lines or radio station is congested. When playing broadcast data with a high bit rate, the sound may be broken, depending on the communications conditions. € vSee overleaf 142 Symptom Cause/Solution Page – GAirPlayH Symptom The AirPlay icon is not displayed in iTunes or on the iPhone/iPod touch/ iPad. [. . . ]