User manual DENON AVR-1912

[. . . ] Do not let insecticides, benzene, and thinner come in contact with the apparatus. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. No naked flame sources, such as lighted candles, should be placed on the apparatus. Getting Started Advanced Operation Remote control unit Operating DENON audio components · This remarkable component has been engineered to provide superb surround sound listening with home theater sources, such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources. [. . . ] DELAY TIME: The delay time can be set within the range of 0 to 110 ms only in the matrix mode. TONE CONTROL: This can be set individually for each surround mode except DIRECT. To select the surround mode while adjusting the surround parameters, tone defeat or tone control, press the SURROUND MODE button, then operate the selector. The parameters which can be set differ for the different surround modes are displayed. You can adjust the channel level either according to the playback sources or to suit your taste, as described below. Press the CH SELECT button to select the speaker whose level you want to adjust. When the surround back speaker setting is set to "1sp" for "Speaker Configuration", this is set to "SB". (The bass or treble sound can be decreased down to ­12 dB in steps of 2 dB. If you do not want the bass and treble to be adjusted, turn on the tone defeat mode. The level of the selected speaker can be adjusted within the range of +12 to ­12 dB by pressing the CURSOR buttons. The SW channel level can be turned off by decreasing it one step from ­12 dB. Manual search (forward and reverse) Stop Play Auto search (cue) Pause Switch discs (for CD changers only) Switch preset channel range Preset channel up/down Frequency up/down Switch between the AM and FM bands Switch between auto and mono Preset memory TUNER can be operated when the switch is at "AUDIO" position. Rewind Fast-forward Stop Forward play Reverse play Switch between decks A and B While this remote control is compatible with a wide range of infrared controlled components, it may be the case that some component models cannot be operated with this remote control. Referring to the included list of preset codes, press the NUMBER buttons to input the preset code (a 3-digit number) for the manufacturer of the component whose signals you want to store in the memory. To store the codes of another component in the memory, repeat steps 1 to 4. The signals for the pressed buttons are emitted while setting the preset memory. To avoid accidental operation, cover the remote control unit's transmitting window while setting the preset memory. Depending on the model and year of manufacture, this function cannot be used for some models, even if they are of makes listed in the list of preset codes. Refer to the included list of preset codes to change the number and verify correct operation. The preset memory can be set for one component only among the following: CDR/MD, DVD/VDP and DBS/CABLE. DENON and other makes of components can be operated by setting the preset memory. This remote control unit can be used to operate components of other manufacturers without using the learning function by registering the manufacturer of the component as shown in the list of preset codes ( End of this manual). [. . . ] 1 surround channels (FL, FR, C, SL, SR and LFE), DTS-ES Extended Surround also offers the SB (Surround Back, sometimes also referred to as "surround center") channel for surround playback with a total of 6. DTS-ES Extended Surround includes two signal formats with different surround signal recording methods, as described below. The sampling frequency, number of bits and number of channels used for recording of music, etc. , in studios have been increasing in recent years, and there are a growing number of high quality signal sources, including 96 kHz/24-bit 5. [. . . ]