User manual DENON AVD-700

[. . . ] € Unplug the power cord when not using the set for long periods of time. € Do not let insecticides, benzene, and thinner come in contact with the set. * (For sets with ventilation holes) • Do not obstruct the ventilation holes. € The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. [. . . ] Accidental Erasure Prevention Tabs • Cassette tapes are equipped with accidental erasure prevention tabs. To protect recordings from being erased accidentally, use a screwdriver, etc. € To record on a cassette tape whose tabs have been broken off, cover the holes with cellophane tape, etc. Accidental erasure protection tab for side B w CD SRS (Synchronized Recording System) button • Use this button for synchronized recording of CDs. 3 PLAY button e REC button • This button is used when recording and when creating blank spaces between selections. NOTE: • If the 1 / 3 (play/pause) button on the CD receiver (RCD-M33/M35DAB) is pressed during the recording pause mode, recording of the CD begins automatically. € The cassette tray opens out when the 5 (open/ close) button is pressed. Load the cassette tape with the side on which the tape is exposed facing away from you. € When these terminals are connected to the tape input terminals on the amplifier or the receiver, the sound from the AVD-700 can be heard through the speakers connected to them. œ When connecting to the RCD-M33/M35DAB, connect to the TAPE IN terminals on the CD receiver (RCD-M33/M35DAB). € When this terminals are connected to the tape output terminals on the amplifier or the receiver, the sound of other components connected to them can be recorded on the AVD-700. € The music search function detects and counts the blank (non-recorded) spaces between selections. Press the 7 (fastforward) button a number of times equal to the number of blank spaces between the current position and the desired position. € The music search function detects and counts the blank (non-recorded) spaces between selections. Press the 6 (rewind) button a number of times equal to the number of blank spaces between the current position and the desired position. NOTE: • The music search function detects blank spaces of 4 seconds or more. 6 8:50 ページ 10 ENGLISH 10 SYSTEM FUNCTIONS 2 Operation is even easier when the components in the RCD-M33/M35DAB is connected to the AVD-700 with system connections. (For instructions on connections , refer to “CONNECTIONS” on page 5 and refer to the respective operating instructions of CD receiver (RCD-M33/M35DAB). ) 2 The system functions will only work when the RCD-M33/M35DAB is connected. To use the system functions, connect the CD receiver (RCD-M33/M35DAB). 2 Names of remote control unit buttons (cassette deck section) LINE button Press this button to switch the function LINE. The input changes in the following order each time this button is pressed. [. . . ] NOTES: • The editing function will not work with discs containing more than 26 tracks. € Load the cassette tape onto which you want to record into the cassette deck’s cassette tray with side A facing up before starting edited recording. The beginning of the tape is automatically found before recording starts. € When using a recorded cassette tape for edited recording, recording stops and a blank section is left on side B of the tape if the tape is longer than the set time, so erase the tape beforehand. [. . . ]