User manual DAEWOO VR 2544 SV

[. . . ] WORTH knowing Please keep the video's guarantee sheet and receipt for your video in a safe place. Before you do anything with the video, please read the chapter "Setting up the video". Precautions x x x x x x Contents AUTO SET OP EJECT CH. x x x x Read this booklet carefully. Make sure the rating of your household electricity supply matches that shown on the back of the video recorder. Read this page and the chapter and the "Setting up your video" to help you set up and adjust your video recorder. Do not put the video recorder in a hot or humid place (to avoid the risk of fire and electric shock). [. . . ] Press to switch back to normal playback. MENU:END VCR - Press PR- to choose the setting you want, for example, -AUTO, -ON or -OFF. Confirm the setting with OK. · Variable slow motion VCR 16:9 Set -Auto : This video automatically detects the program format (16:9 or 4:3) and records or plays this program in the same format. -OFF : The video will play or record all broadcasts in 4:3 format only. Starting from playback you can keep pressing s to control slow motion speed in six steps. Press to switch back to normal playback. 3 Finding new recordings (index scan) The video index search system allows you to find the beginning of any recording you have made on your video. Your video automatically records index marks on the tape whenever a recording is started. FF SP INDEX 01 Press INDEX + or INDEX ­ to search forwards or backwards. The video will now wind to the beginning of a recording, play it for about 6 seconds, then wind on to the next one. For the above formats to work your TV must be able to automatically detect a 16:9 broadcast. In the case of turning 16:9 format off, your TV may override this decision and display the picture in 16:9 format. 0:11:09 When you see the recording you want to watch, press PLAY. 14 15 OSD(On Screen Display) ON & OFF CM Skip If you press [CM Skip] button on the remote control during playback mode, tape advances for 30 seconds segment. This VCR is set to "OSD (On Screen Display) ON" mode at the factory, but you can change it to OFF mode. When a function is changed at the front display or remote control the change will be displayed on the screen. 1 MAIN MENU TIMER PROGRAM PR PRESET VCR SETUP TAPE CONTROL PR+/-:SELECT OK:CONFIRM MENU:END Auto Repeat If you press the PLAY button for 5secs during playback mode, REP should appear on your display, the video goes into Auto repeat mode. To release this mode, press any mode operation button such as PLAY, FF, REW or STOP. Press MENU. Choose "VCR SETUP" And press OK. 2 VCR SETUP CLOCK SET LANGUAGE SET RF OUTPUT SET 16:9 SET OSD ON/OFF PR+/-:SELECT OK:CONFIRM MENU:END Choose "OSD ON/OFF". Child lock You can only set the child lock with your remote control. 3 OSD ON/OFF ON OFF PR+/-:SELECT OK:CONFIRM If you want OSD OFF mode, press PR- and press OK. OSD characters will not be displayed in the normal picture at the start of each mode change. MENU:END Press the button for about 5 seconds. No buttons of front panel can be operated now and LOCK INDICATOR ("SAFE") will be displayed momentarily on LED display. To release child lock, press any button of the remote control. Setting time and date CLOCK SET 1 TIME - - : - DATE - -/- -/- - - 0-9:SETUP (HOUR) / :CORRECT OK:CONFIRM MENU:END If the `CLOCK SET' display is not already on the screen press MENU. Once the `CLOCK SET' display is on the screen, move to the position you want to change by pressing or . Use the number buttons 0 to 9 on the remote control to enter the correct time and date. Press OK to confirm the settings, and press MENU to end. CLOCK SET 2 TIME 11:41 DATE 12/07/2004(MON) 0-9:SETUP (HOUR) / :CORRECT OK:CONFIRM MENU:END 16 17 Recording cassettes x Timer recording using ShowView ShowView is an automatic system which makes it easier to set the timer. x If you want to use the video's timer to record a programme, the clock, date and stations must be set correctly. Load a cassette with its safety tab in place (see page 24) and with enough free tape for the recording. Simple recording Load a cassette with its safety tab in place (see page 24). STOP SP PR01 ARD STEREO ON 1 SHOWVIEW 83077---0-9:SHOWVIEW NUMBER :CORRECT OK:CONFIRM MENU:END Press PROG. From your current TV guide, type in the number next to the programme you want to record using the number buttons 0-9. Press PR+ or PR- to select how often you want to make the recording, for example, once, weekly and so on. If you wish to change any details: Move to the details you want to change using the / buttons. Change the setting using the PR+ or PR- or number buttons 0-9. Press PR+ or PR- to choose the station you want to record. Press SP/LP if you wish to double the length of the cassette's recording time. For example, on an E-240 cassette you can record for up to four hours when SP is displayed, or up to eight hours when LP is displayed. 2 HOW OFTEN DO YOU WANT TO RECORD THIS PROGRAM? ONCE WEEKLY(ONCE A WEEK) DAILY(MON-FRI) DAILY(MON-SAT) DAILY(MON-SUN) PR+/-:SELECT OK:CONFIRM MENU:END VCR Press to start your recording. 3 Press if you want to stop the recording for a short while. VCR PR 03 START TIME 21:20 END TIME 22:20 START DATE 14/07(WED) TAPE SPEED SP VPS/PDC ON PR+/-:SELECT (AV1/AV2) 0-9 : SETUP (PR) / :CORRECT OK:CONFIRM MENU:END TIMER PROGRAM (ONCE) If all the settings are correct, press OK. [. . . ] In this case, please turn to page 5 and carry out step 2 until you see the manual tuning screen. A blue screen is displayed when you switch the video on If a blue screen appears when you switch the video on, the AV button has been pressed. Press AV on the remote control until P-_ _ appears on the display of the video, or until a TV picture is displayed. The timer light stays on the display, even though the recording has finished If the timer light stays on even though the recording has finished, this is because VPS/PDC takes into account a delay in recording for up to 24 hours. The TV/VCR button on the video remote control will not work This button will only work if the TV has the appropriate internal switch and a scart lead is connecting the TV and video. The television will not change channel when the video is turned on If the television will not change channel while the video is on, check whether a scart lead has been connected. (See page 2 option 2) If a scart lead has been connected, you need to press the TV/VCR button on the video remote control. When the small VCR symbol appears on the display, you can only change channel by using the video remote control. [. . . ]