User manual DAEWOO SD-9100

[. . . ] DVD-VIDEO PLAYER Owner's Manual SS -9100/SD-31000 DD 91 0/ S D 31 - - Region code of DVD/Video player for home is region "2" or ALL. If this mark is displayed in operating the product, please wait for a while, then use it. If " DO NOT" mark continues to be displayed in pressing a button after that, it means the button does not function in the currently played disc. · DVD operation : [DVD] button · Video operation : [VCR] button Product information Contents Product Information Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If you wish to start recording at a specific time without it being adjusted by the VPS/PDC system in the event of a delay, switch VPS/PDC off otherwise the player will not record. · If you don't have the ShowView numbers see next page for the normal timer. · If you have made a mistake, move back to the relevant position with the [<] button and change the setting. · If there is no programme location displayed under "PR" in the change menu, the player doesn't yet know the location number for the programme you want. · If you wish to record from a satellite receiver, select under "PR" the satellite programme location or AV (1/2) (depending on the connection with the antenna cable or the SCART-cable). · To cancel the recording press the button (stop) more than 5 seconds. · ShowView is a trademark applied for by Gemstar Development Corp. . The ShowView system is manufactured under license from Gemstar Development Corporation. 25 Timer Recording s For timer recordings, clock, date, and stations must be set correctly. s Load a cassette with its safety tab in place and with sufficient free space for the recording. Normal timer recording 1 2 Call the player's "MAIN SETUP", choose "TIMER PROGRAM". Decide if you want to record "ONCE", "WEEKLY" or "DAILY". . . and confirm. HOW OFTEN DO YOU WANT TO RECORD THIS PROGRAM? ONCE WEEKLY(ONCE A WEEK) DAILY(MON-FRI) DAILY(MON-SAT) DAILY(MON-SUN) PR+/-:SELECT OK:CONFIRM SETUP:END Type in one after the other: · The programme location number; · the time the broadcast starts, · the time the broadcast ends, · the day of the broadcast, if it is not today. · Switch off VPS/PDC here if you need to . TIMER PROGRAM (ONCE) PR -START TIME --:-END TIME --:-START DATE --/-TAPE SPEED SP VPS/PDC ON PR+/-:SELECT(AV1/AV2) 0-9 :SETUP(PR) </>:CORRECT SETUP:END 3 If you wish to make changes: Move to the position you want to change using the [< / >] buttons. If all setting are ok, press [< or >], till you see "OK : CONFIRM" in the bottom line. Switch your player off. PR 01 START TIME 18:10 END TIME 20:30 START DATE 20/10(FRI) TAPE SPEED LP VPS/PDC ON PR+/-:SELECT(AV1/AV2) 0-9 : SETUP (PR) TIMER PROGRAM (ONCE) </>:CORRECT OK:CONFIRM SETUP:END · Wait a few seconds after typing a one-digit-number. · If you have made a mistake, move to the position you want to change using the [< / >] buttons and change the setting. · If programme timings overlap, the machine will give a warning message. If you don't adjust the times, the machine will record the first programme completely then continue with the second one. · If there is no sufficient free space for the recording on the cassette the video switches automatically to "LP" for double recording capacity. · The recorder will eject cassettes which have the safety tab removed. 26 Timer Recording Timer Review ­ changing and erasing 1 2 Call the player's "MAIN SETUP", choose "TIMER PROGRAM". TIMER PROGRAM PR 03 01 ------- START END DATE 21:20 22:20 14/10 18:10 -- : --- : --- : --- : --- : --- : -20:30 -- : --- : --- : --- : --- : --- : -20/10 -- / --- / --- / --- / --- / --- / -- PR+/-:SELECT OK:CONFIRM SETUP:END Select the programming to change or erase. If you want to erase this programming press button [0], confirm with OK. If you wish to make changes: Move to the position you want to change using the [< , >] buttons. If all settings are ok, press [< or >], until you see "OK: CONFIRM" in the bottom line. [. . . ] (Please cover a tab hole with cellophane adhesive tape (Scotch tape). ) Please check whether the clock is right. Does the display on your video show " " (Ready to timer recording)?(If it was broken, please scotch-tape it) Was a cable data output code connected correctly?Some tapes or discs distributed in the market for lending is set to prevent copy in manufacturing. [. . . ]