User manual DAEWOO DW-8000P INSTALLATION GUIDE

[. . . ] Table of Contents CONGRATULATIONS!. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2/ STEP 1 - KNOW YOUR PC'S OPERATING SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2/ STEP 2 - DETERMINE YOUR CONNECTION SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/ STEP 3 - INSTALL THE ADSL MODEM CARD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] And enter in the PVC_VPI, PVC_VCI, and ADSL Line Type values supplied by your ADSL service provider. The Update Device Driver Wizard will appear and indicate, "Windows was unable to locate a driver for this device". Click [Other Locations]. If prompted to insert your Windows CD, do so at this time, then click [OK]. 8. Enter the Windows 95 installation files path (F:\Win95) and click [OK]. 10. Click [Browse] to locate the driver on your CD-ROM for the protocol supported by your ADSL provider: F:\Drivers\Win95 (The example uses "F" as the CD-ROM drive letter. Then click [OK]. 9. The Update Device Driver Wizard will detect the ADSL modem card as a DAEWOO COMMAGNT, then click [Next]. 11 12 10. The Update Device Driver Wizard will appear and indicate, "Windows was unable to locate a driver for this device". Click [Other Locations]. Windows 98, 98SE After installing the ADSL modem card, plug the power cable back into the PC system and turn the power on. 1. 11. Click [Browse] to locate the driver on your CD-ROM for the protocol supported by your ADSL provider: F:\Drivers\Win95 (The example uses "F" as the CD-ROM drive letter. 2. The Add New Hardware Wizard window will automatically appear to indicate that a new PCI ATM Controller has been found. The Add New Hardware Wizard will appear and indicate the DW-8000P PCI NIC ADSL Driver has been recognized and will install a new driver. F:\Win98), then click [OK]. 9. At the conclusion of the ADSL modem driver installation, the Add New Hardware Wizard window appears and displays your newly installed DW-8000P PCI NIC ADSL Driver. For the PC system to set up the DW-8000P PCI NIC ADSL Driver, a system Restart is required. Your ADSL Internet connection is established! The DW-8000P NIC ADSL Driver Settings window appears. And enter in the PVC_VPI, PVC_VCI, and ADSL Line Type values supplied by your ADSL service provider. 15 16 5. At the conclusion of the ADSL modem driver installation, the Add New Hardware Wizard window appears and displays your newly installed DW-8000P PCI NIC ADSL Driver. Click [Finish]. Windows NT4. 0 After installing the ADSL modem card, plug the power cable back into the PC system and turn the power on. On your desktop, double-click My Computer, then double-click Control Panel. For the PC system to set up the DW-8000P PCI NIC ADSL Driver, a system restart is required. Insert ADSL Driver CD-ROM into your systems CD drive. 5. The Insert Disk window appears. Type in: F:\Drivers\WinNT (The example uses "F" as the CD-ROM drive letter. Your drive may have a different letter. ) Click [OK]. 6. The Select OEM Option window will find the DAEWOO NicAdsl PCI Ethernet Adapter, Click [OK]. 17 18 7. The DAEWOO NicAdsl PCI Adapter Card Setup window appears. And enter in the PVC_VPI, PVC_VCI, and ADSL Line Type values supplied by your ADSL service provider. Click on the Protocols tab and verify that the ADI Comm Agent Driver and TCP/IP Protocol are present. 8. 11. [. . . ] Consult with your ADSL provider before attempting any wiring changes. LED functions for the DW-8000P Modem LED Green LED on Left Top Green LED on Right Top Orange LED on Right Bottom Red LED on Left Bottom Status ACT LINK Signals On Off On Blink Off Blink Off Blink Description Activation Request exists Activation Request doesn't exist Modem not connected Modem connecting Modem connected Data Transmission occurred No Data Transmission occurred CRC error occurred DATA CRC 29 30 System Requirements & Compliance Certification System Requirements IBM PC/AT or compatible Pentium 100Mhz or faster speed 30Mbytes available hard disk space or more 2x CD-ROM drive or better 32Mbyte available system memory or more Power Requirements 0. 75A Max @ +5V ± 5%, 0. 1A max @ ± 12V, ± 5% Environmental Requirements Operating Temperature: 0 °C to 70°C with airflow Non-operating Temperature: -10 °C to 85 °C Operating Humidity: 10% to 90% non-condensing Non-operating storage humidity: 5% to 95% non-condensing Compliance Certification FCC approved Part 15, Class B IC approved CS-03 and ICES-003 cUL Listed Consult an experienced radio/TV technician for help. Canadian IC CS-03 Compliance Statement NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements documents(s). The department does not guarantee the equipment will operate to the user's satisfaction. [. . . ]