User manual DAEWOO DVT-20H4UD

[. . . ] GB INSTRUCTION MANUAL DVT-14H3UB/DVT-14H3UD DVT-20H4UB/DVT-20H4UD/ DVT-21H4UB CUSTOMER SERVICES HELPLINE 01189 252 577 100 WORTH knowing Please keep the televideo machine's guarantee card receipt safe for warranty purposes. Precautions x Read carefully through this manual to familiarise yourself with this high quality televideo. x Make sure the rating of your household electricity supply matches that shown on the back of the televideo. x Refer to this chapter and the "Initial installation" chapter to help you install and adjust your televideo. Do not. . . x Expose the televideo to high levels of humidity and heat, to avoid the risk of fire and electric shock. x Open the televideo. x Connect the televideo to the power supply if you have just moved it from a cold to warm environment. This can result in condensation inside the recorder and cause serious damage to the machine and cassettes. [. . . ] Date Start End 1 01 05 14:18 17:15 2 --- --- --:-- --:-3 --- --- --:-- --:--4 --- --- --:-- --:--5 --- --- --:-- --:--6 --- --- --:-- --:--VW : Change CB : Select MENU : Previous PDC SP/LP Off SP Off SP Off SP Off SP Off SP Off SP CLEAR: Delete : Store x You can switch your televideo off during recording using the button. (Don't use the main power button (ON/OFF) on the front panel of the set. ) The televideo will switch on and off automatically to record the timer event. x If you have made a mistake, move to the position you want to change using the VW CB button and change the setting. x The recorder will eject cassettes which have the safety tab removed. x You cannot access "Install menu" when "Timer porgramme" is setting. That means, if you want to access "Install menu", you should delete all data in "Timer programme". x Select the programming to erase or change If you want to erase this programming press button CLEAR. Auto tracking If you press the 0/ATK key in Playback mode, the televideo will operate the auto tracking function again. x If you wish to record from a satellite receiver select under "Pr" the satellite programme location or AV (depending on the connection with the aerial cable or a SCART cable. ) NB : Leave the satellite tuner switched on and to the programme you want to record. 11 RECORDING cassettes x For timer recordings, clock, date, and stations must be set correctly (page 5). x Load a cassette with its safety tab in place (see page 10) and with sufficient free space for the recording. Timer recording using VideoPlus+ Video Plus+ Call the VideoPlus+ menu using SV/V+ button. 13:57 --------01/01/2001 0-9 CLEAR SV/V+ : Digit Entry : Store : Delete : Exit From your TV magazine, type in the number next to the programme you want to record. (Digit key) Confirm ( button) Timer programme No Pr Date Start End 1 01 05 14:18 17:15 2 --- --:-- --:-3 --- --:-- --:--4 --- --:-- --:--5 --- --:-- --:--6 --- --:-- --:--VW : Change CB : Select MENU : Previous PDC SP/LP Off SP Off SP Off SP Off SP Off SP Off SP If you press the button, Timer Programme menu will be displayed. Confirm ( button) CLEAR: Delete : Store x If you have not set the clock, when you press the VideoPlus+ button to set timer recording, the set will automatically change to the "CLOCK" menu. x If you don't have the VideoPlus+ numbers see page 11 for the normal timer. x If you have made a mistake, move back to the relevant position with the C button and change the setting. x The screen will indicate if the station is not programmed (page 5~7). x In the case of error messages, correct the input or check the date and time on your televideo (also check your TV guide). 12 x Your televideo automatically sets an electronic marker (index) at the beginning of each recording and timer recordings. It is these markers which are detected by the index function. M o r e FUNCTIONS INDEX +/FI FF 00:12:34 INDEX 02 Pr 01 ARTE Clock 12:34 Press the button depending on the number of recordings (index marks) that you wish to wind forward. Press the button depending on the number of recordings (index marks) that you wish to wind backwards. 3x for 3 recordings back. IG REW 00:12:34 INDEX -02 Pr 01 ARTE Clock 12:34 Resetting the counter to zero M REC 00:00:00 Pr 01 ARTE Clock 12:34 Press C-RESET button to reset the counter to 0 : 00 : 00 After you have finished recording pressing the C-ØSTOP button will cause the televideo to wind to the position 0 : 00 : 00 and stop. G REW 00:12:34 Go to zero Pr 01 ARTE Clock 12:34 Mute Pressing the mute button once turns the sound off. The sound returns if button is pressed once more Child lock Child lock Enter number to lock ---- 0-9 CLEAR MENU : Digit Entry : Store : Delete : Previous Choose "Miscellaneous" from the "main menu" and select "Lock". Subsequently the TV picture will be overlaid with the child lock (OSD) On Screen Display and the sound will be muted. If you select "Local lock" to yes, all the buttons on the front panel become inoperative. Yes Lock Child lock Local lock VW : Select CB : Change MENU : Previous 13 M O R E functions Cassettes Use only good quality tape cassettes with the VHS logo. x Keep cassettes away from excessive moisture or dust, magnetic and electrical fields eg. Store with the full spool at the botton and with the cassette in its cover. You can protect your precious recordings from being wiped by breaking out the safety tab on the side of the cassette (some cassettes have a slide). [. . . ] If you want to watch TV and stay informed at the same time, press CANCEL ( ) button. The regular programme is still visible when the teletext symbol ( ) appears at the top of the screen. Pressing the CANCEL button again, the teletext page will appear with the updated information. REVEAL ANSWER This function can be used on certain pages to reveal the solution of riddles. [. . . ]