User manual DAEWOO DV-6T955B annexe 1

[. . . ] Owner's Manual DVD-VIDEO PLAYER [Hi-Fi Model] DV­6T834N DV­6T834B DV­6T834NP DV­6T844N DV­6T844B DV­6T955B DV­6T975B DV­6T985B DV­6T985M DV­6T999B DV­6T999N DV­6T534B DV­6T544N DV­6T544B [Mono Model] DV­6T534N N In the initial settings, exclusive channel for DVD/Video is set to CH 3. If this mark is displayed in operating the product, please wait for a while, then use it. If " Prohibition" mark continues to be displayed in pressing a button after that, it means the button does not function in the currently played disc. · DVD operation : [DVD] button · Video operation : [VCR] button P/N : 97P95600N0-** IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN PRODUCT INFORMATION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] For program recording, insert a cassette. End: SETUP To Confirm or Cancel TIMER RECORDINGS 1 2 Repeat steps 1-6 of "Timer Recording". Select "Review/Cancel Programs". TIMER RECORDINGS Make a New Program Review/Cancel Programs Move: End: SETUP Select: ENTER Confirm Timer Recording details with [v] and press [CLEAR] to delete specific details. PROGRAM 1 (ONE TIME) Channel Start Date Start Time End Time Tape Speed Move: End: SETUP 104 Cable 06 / 04 10 : 10 AM 11 : 10 AM SP Cancel: CLEAR Change: ENTER 27 TIMER RECORDING Timer Program Setting Press [PROGRAM] in VCR mode. This is a shortcut to view the Timer Recording menu. Before setting a Timer Recording, the clock should be set correctly and VCR mode should be selected. Types of Timer Recordings One Time: A single Timer Recording on a specific date and time. Daily : A Timer Recording that will record at the same time every day. Weekday : A Timer Recording that will record at the same time Monday through Friday. Weekly : A Timer Recording that will record once a week on the selected day and time. Using Video Cassettes Before you play or record on a video cassette tape, please read this information on the proper care and use of video cassettes. There are four types of video cassettes: T-60, T-90, T-120, and T-160. The amount you can record on a tape is dependent upon the tape speed at which you record. The table below lists the recording time (hours:minutes) for each tape type according to recording speed. Tape Type SP Mode (Standard Play) SLP Mode (Extended Play) T-60 1:00 3:00 T-90 1:30 4:30 T-120 2:00 6:00 T-160 2:40 8:00 Protecting video cassettes from accidental erasure Cassettes have a safety tab to prevent erasure. If you wish to record on a cassette without a safety tab, cover the hole with cellophane tape. If you insert a video cassette without a safety tab into the unit after setting the timer recording program, "( ) " will blink on the display panel in the power off mode and the unit will automatically eject the cassette. If you insert a video cassette with a safety tab into the unit after setting the timer recording program, the unit will be in stand-by mode. Inserting video cassettes Firmly insert the cassette into the cassette compartment with the label up. Do not insert fingers or any foreign object beyond the door flaps of the cassette compartment; this could lead to injury or equipment damage. Removing video cassettes Press [VCR EJECT] on the front panel and the VCR will eject the tape. Do not attempt to pull out the video cassette after the unit begins to load the video cassette. Let it finish loading, then press [EJECT] to eject it. · Audio-visual material may include works of copyright which must not be recorded without authorization of the copyright owner. 28 WATCHING AND RECORDING CABLE TV I Because of the nature of converter boxes, you cannot watch one Cable TV channel and record another at the same time. To Watch and Record Cable TV 1 2 1 2 3 Turn on the cable box and then set a channel to watch or to record. Turn on the DVD+VCR and then set the DVD+VCR channel connected to the converter (CH03/04/EXTERNAL INPUT). Power on TV and then set the channel connected to the DVD+VCR (CH03/04/VCR). Recording while Watching With the setup described above, the channel selected by the converter is displayed on screen. Press [REC] on the DVD+VCR to record the channel selected by the converter, or press [REC] repeatedly to set One Touch Recording (OTR) (see page 25). VCR OPERATION TIMER RECORDINGS from Cable TV Program VCR. Follow the instructions on page 26 for setting a Timer Recording. Set the DVD+VCR to the channel input from the converter box (CH3, CH4 or EXTERNAL INPUT). Enter date and time of the cable program in the Timer Recording menu. Set Channel on Converter Box. Set converter to the cable TV channel you wish to record. [. . . ] While playing a videotape, there may be some noise at the beginning of the tape or when resuming playback after pausing the tape, which is normal. Try playing another one to decide if the problem is the tape of the VCR. VCR heads may be contaminated. · A videotape will not insert. · On inserting a videotape, the tape is re-ejected. · A videotape is not ejected. · A channel on video and a play screen does not appear. · Noise (screen noise) appears on screen. [. . . ]