Detailed instructions for use are in the User's Guide.
[. . . ] USER MANUAL
HDTV Monitor
DSC-34W70N
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
NOTE TO CATV SYSTEM INSTALLER
THIS REMINDER IS PROVIDED TO CALL THE CATV SYSTEM INSTALLER'S ATTENTION TO ARTICLE 820-40 OF THE NEC THAT PROVIDES GUIDELINES FOR PROPER GROUNDING AND, IN PARTICULAR, SPECIFIES THAT THE CABLE GROUND SHALL BE CONNECTED TO THE GROUNDING SYSTEM OF THE BUILDING, AS CLOSE TO THE POINT OF CABLE ENTRY AS PRACTICAL.
CAUTION
The AC power cord provided with this product is polarized (one blade wider than the other). To prevent electrical shock, match wide blade of plug to wide slot, fully insert the AC plug into a standard 120V~ 60Hz polarized outlet.
NOTE
Never connect the plug to an electrical source other than one providing 120V~ 60Hz power. [. . . ] <For pressing "AUTO PICTURE" button once>
Standard
<For pressing "AUTO PICTURE" button many times>
Cinema
Dymamic
User
2. Use this mode and get quality pictures on the screen.
·Starting from the picture above, choose the appropriate picture quality you want by using "VOLUMEC/B" buttons. ·Picture adjustment is also available in each "Video" mode. (Video1, Video2, Video3, DVD) ·Picture adjustment is also available in each "S-Video" mode. (S-Video1, 3)
User
29
Picture Noise Reduction
1. Press "MENU" button.
·The screen appears as follows :
LLow transmission signals may cause bad picture or noise. LThis function corrects this type of problem.
Picture
Move
Sel.
Exit
x 2. Select "Picture" by using "CHANNELx" button.
Picture
Brightness Contrast Sharpness Color Tint Picture NR 32 60 32 32 32:32 Off
·Move the cursor to the "Picture" menu by using "CHANNEL x" button.
LTo eliminate or reduce picture noise, press to select "On" in "Picture NR" mode of "Function" sub-menu.
Move
Adj.
Prev.
xy 3. Press "CHANNELx/y" buttons.
Picture
Brightness Contrast Sharpness Color Tint Picture NR 32 60 32 32 32:32 Off
Move
Adj.
Prev.
·When "Picture" mode is selected, its sub-menu appears on the screen. ·Continue to press "CHANNELx/y" buttons, and the entries of this sub-menu turn blue in the sequence as follows : Brightness Contrast Sharpness Color Tint Picture NR ·Select "Picture NR" function by using "VOLUMEC/B" buttons, and then, "On" and "Off" repeat in turn. Press "MENU" button twice.
·Press this button one time, and the menu window appears. Press it again, and you will get the previous status of the menu window. (Menu disappears)
30
Adjusting the Picture Screen to Your Preference
LAccording to the user's preference, brightness, contrast, sharpness, color, and tint can be adjusted for each of Video1, Video 2, Video3, DVD, and TV mode.
1. Press "MENU" button.
·Then the screen appears as follows:
Picture
Brightness:
·Adjusts the degree of brightness or darkness of the whole screen.
Move
Sel.
Exit
Contrast:
·Adjusts (controls) the degree of brightness between the objects and background of the picture.
x 2. Select "Picture" by using "CHANNELx" button.
Picture
Brightness Contrast Sharpness Color Tint Picture NR 32 60 32 32 32:32 Off
Sharpness:
·Adjusts the shapes of objects in the picture, making them appear softer (blurred) or sharper (clean).
Move
Adj.
Prev.
Color:
·Adjusts the degree of color saturation.
·"Picture" mode is selected, and its sub-menu appears. ·Continue to press "CHANNELx/y" buttons, and the selected sub-menu sign changes into a blue bar in the following sequence : Brightness Contrast Sharpness Color Tint Picture NR ·Press the "CHANNELx/y" buttons, and capture "Tint" on the blue bar.
Tint:
·Adjusts to produce the proper natural color of objects.
31
CB 3. Adjust "Tint" by using "VOLUMEC/B" buttons.
Picture
Brightness Contrast Sharpness Color Tint Picture NR 32 60 32 32 32:32 Off
·Press "VOLUMEC" button, and the green tint increases. ·To adjust other functions such as brightness, etc. , select the function you want by using "CHANNELx/y" buttons, and adjust the mode as above.
Move
Adj.
Prev.
Tint
32:32
CB 4. Adjust "Brightness" by using "VOLUMEC/B" buttons
Picture
Brightness Contrast Sharpness Color Tint Picture NR 32 60 32 32 32:32 Off
·Press "VOLUMEB" button for the Brightness to in crease. ·Press "VOLUMEC" button for the Brightness to decrease.
Move
Adj.
Prev.
Brightness
32
5. Press "MENU" button twice.
·Press this button one time, and the menu window appears. ·Press it again, and the previous status of the menu window appears. ·To adjust other functions such as brightness, etc. , select the function by using "CHANNELx/y" buttons, and adjust them by using "VOLUMEC/B" buttons.
Picture
Move
Sel.
Exit
32
ADJUSTING THE SOUND
Customizing the Audio
1. Press "MENU" button.
·Then, the screen appears as follows :
Picture
"Balance"
LThis function balances the volume between left and right speakers. L"Balance" adjusting screen appears as follows:
Sound
Mode Balance Headphone Vol Center Vol Equalizer Mono 32:32 50 10
Move Sel. Select "Sound" menu by using "VOLUMEC/B" buttons.
·Move the cursor to the "Sound" menu by using "VOLUMEC/B" buttons. [. . . ] Select "Tilt"
Special
Pro Logic ( Tilt DTV 32:32 Off
· Press "CHANNELx/y" buttons to select "Tilt"
Move
Sel.
Prev.
CB 4. Adjust "Tilt" functions using "VOLUMEC/B" buttons.
· Press "VOLUMEC/B" buttons to level a tilted picture. · Note: The effect of the earth's magnetic field can vary with location. As a result, the picture may project on a slight tilt, or out of square alignment with the face of the picture tube.
51
DTV Input Selection
1. Press "MENU" button.
·The main menu will appear.
Picture
Move
Sel.
Exit
2. Select "Special".
·Move the cursor to the "Special" menu using "VOLUMEC/B" buttons. [. . . ]