User manual DAEWOO DSC-30W60N

[. . . ] User Manual DSC-30W60N H DT V HDTV Important safety instructions · Read all safety and operating instructions before operating the TV receiver. · Retain the safety and operating instructions for future reference. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). It is dangerous to make any kind of contact with any internal part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product. [. . . ] The SPEAKER OFF menu is displayed. SPEAKER OFF If you want to use the external L/R/C speakers, select 'Yes'. If you: do not want to use external (left/right/center) speakers, highlight No and press the SEL button. · do want to use external speakers, highlight Yes and press the SEL button. · Move Select Adjusting rear speakers for surround sound 1. From the SPEAKER SETUP menu, highlight Rear Speakers (LS, RS) and press the SEL button. The REAR SPEAKERS menu is displayed. REAR SPEAKER Select the type of rear speaker connected to the HDTV. · External (Large) · External (Small) · None 2. Highlight the kind of rear speakers you connected to the HDTV: · External (Large) · External (Small) · None 3. Press the PREV button to return to the SPEAKER SETUP menu. To adjust for a subwoofer: 1. Press the SEL button. SUBWOOFER Select 'Yes' if the subwoofer is connected to the HDTV. · Yes · No 2. If you: do not want to use a subwoofer, highlight No and press the SEL button · do want to use a subwoofer, highlight Yes and press the SEL button. When finished, press the PREV button to return to the SPEAKER SETUP menu. · SEL Move Select 21 H DT V HDTV Setting up digital audio You can set the HDTV to automatically adjust to play the kind of digital audio that you connected. From the MAIN MENU, use the up/down arrow buttons to highlight SETUP. From the SETUP menu, use the up/down arrow buttons to highlight Digital Audio. If you connected: · the video outputs of equipment to the High Definition video inputs on the rear panel Use the up/down arrow buttons to select whether you connected the audio outputs of your equipment to the optical, coaxial, or component audio inputs on the rear panel. the video outputs of equipment to the Video 1 inputs on the rear panel Use the up/down arrow buttons to select whether you connected the audio outputs of your equipment to the optical, coaxial, or RCA (Analog L, R) audio inputs on the rear panel. the audio inputs of equipment to the Digital Audio Output terminals Use the up/down arrow buttons to select whether the output format of audio is Dolby Digital or PCM. Press the SEL button. HD Input Audio Select DIGITAL AUDIO Select the input/output format of the audio jacks on the rear panel. · Optical · Coaxial · Component Video 1 Input Audio Select · Optical · Coaxial · RCA (Analog L, R) Digital 1 Audio Output Format · · Dolby Digital SEL · PCM Move Select · Selecting surround sound You can use the HDTV menus to choose different kinds of surround sound, or to hear regular stereo. From the MAIN MENU, use the up/down arrow buttons to highlight AUDIO. Press the SEL button. LISTENING MODE Select one of the listening modes. · Dolby Surround (L, R, C, Ls, Rs) · 3 Stereo (L, R, C) · Phantom Center (L, R, Ls, Rs) · Stereo (L, R) 2. From the AUDIO menu, use the up/down arrow buttons to highlight Listening Mode. [. . . ] Press and hold the MODE button (SAT, CATV, VCR, TV) for the component you are setting up until the Mode Selection button flashes. 4. Enter the 3-digit component code using the remote control Number buttons (0~9) pointing the remote control toward the component. (If the component does not turn on, repeat step 4 using another code. ) 5. Press the Mode button and then it will blink three times and go out. NOTE: Your component may not be compatible with the HDTV's remote control. [. . . ]