User manual DAEWOO DRH-7415,8414

[. . . ] DG-V74D1D-AB-I(GB) 2007. 5. 31 2:21 PM `A mac001 1200DPI 100LPI HDD/DVD Recorder DRH-7415/8415 User Manual DG-V74D1D-AB-I(GB) 2007. 5. 31 2:21 PM `B mac001 1200DPI 100LPI Safety Instructions Please keep the product's guarantee sheet and receipt in a safe place. Precautions · · · · · · Read this booklet carefully. Make sure the rating of your household electricity supply matches that shown on the back of your product. Read this page and chapter `Setting up your product' to help you set up and adjust your product correctly. Do not connect the product to the power supply if you have just moved it from a cold environment to a warm room. [. . . ] 80% "VPS/PDC" and "Auto Clock Set" are not provided for some countries. 28 DG-V74D1D-AB-I(GB) 2007. 5. 31 2:21 PM ` 29 mac001 1200DPI 100LPI Setup menu System > System Info `System Info' helps service personnel identify key firmware information about your HDD/DVD Recorder in case service is required. System System Info ENTER ENTER ENTER System > Restore Default If you wish, you can reset the HDD/DVD Recorder to its original factory settings. Use [. . . /] to select `OK' and press [ENTER]. System System Info DivX (R) VOD DRM Restore Default Confirm MENU Back SETUP Exit DivX (R) VOD DRM Restore Default System > System Info SETUP Version GD3000007CK-070205 Loader Version BH007 A100 Micom Software 00. 02 Restore Default Do you want to Restore Default?Confirm MENU ENTER Confirm MENU Back SETUP Exit Back SETUP Exit OK Cancel System > DivX(R) VOD DRM We provide you the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit www. divx. com/vod. System > DivX(R) VOD DRM · Some options cannot be reset, including Parental Controls and Password. · After Restoring Defaults, the unit is powered off automatically. You must set the country, language, channel, and clock settings again. DivX (R) Video On Demand Your registration code is : MRRRZQZT To learn more visit www. divx. com/vod Confirm MENU Back SETUP Exit 29 DG-V74D1D-AB-I(GB) 2007. 5. 31 2:21 PM ` 30 mac001 1200DPI 100LPI Setup menu Disc > Format If you load a completely blank disc to the HDD/DVD Recorder, the recorder will initialize the disc to DVD+VR mode. Also, you can reformat the DVD-RW/DVD+RW from the Setup menu as below. If you want to change the disc format, everything recorded on the disc will be erased. Disc > Finalize Finalizing `fixes' the recordings in place so that the disc can be played on a regular DVD player or computer equipped with a suitable DVD-ROM drive. Finalizing a Video mode disc creates a menu screen for navigating the disc. This is accessed by pressing [MENU]. Once you have finalized a DVD-R and DVD+R disc, you cannot edit or record anything else on that disc except DVD+RW. However, you can record and edit a DVD-RW disc by choosing `Unfinalize' option. 1 2 3 Press [SETUP]. If you use the disc to save picture files, music files, etc, you had better choose 'Data Disc' on the submenu. While `Disc' is selected, press [. . . /] to select `Finalize'. The recorder starts finalizing the disc. Disc Format Finalize 4 Press [ENTER] to start formatting the disc. Disc Format DVD+VR Data Disc ENTER Confirm Finalize Protect Disc Label Disc Info Protect Disc Label MENU Back SETUP Exit Disc Info Disc Format Finalize Protect Disc Label Disc Info Do you want to finalize this disc?OK Cancel Finalize/Unfinalize ENTER DVD+VR ENTER Data Disc Finalize/Unfinalize Confirm MENU Back SETUP Exit Finalizing disc, please wait. . . Format Formatting DVD, please wait. . . 80% 30 Confirm MENU Back SETUP Exit 80% DG-V74D1D-AB-I(GB) 2007. 5. 31 2:21 PM ` 31 mac001 1200DPI 100LPI Setup menu Disc > Protect When recording in DVD-RAM / DVD+RW / +R disc or VR mode formatted DVD-RW disc, set to 'Protect' to prevent accidental recording, editing or deleting of the disc loaded. If you need to unlock the disc to make edits, select 'Unprotect'. Disc Format Finalize Protect Disc > Disc Label Use this to enter a name for the disc. This name appears when you load the disc and when you display disc information on-screen. For discs formatted on a different recorder, you will see only a limited character set. And press [ENTER]. Disc ENTER Confirm Disc Label Disc Info Back SETUP Exit SETUP Protect Do you want to protect this disc? Format Finalize Protect Disc Label OK Cancel Protect Protecting DVD, please wait. . . 80% ENTER Disc Info Confirm MENU Back SETUP Exit 4 Disc Format Finalize Unprotect ENTER Keyboard menu appears. Use [. . . oe ] to select a character then press [ENTER] to confirm your selection. Save : Save a new label after finishing entering characters. Disc Label Disc Info Confirm MENU Back SETUP Exit Unprotect Do you want to unprotect this disc? [. . . ] The skipped channels were deleted with the `Adjust Channels' feature. Select the appropriate video input on the TV so the picture from the HDD/DVD Recorder appears on the TV screen. Select the correct input mode on the audio receiver so you can listen to the sound from the HDD/DVD Recorder. (Check that the disc indicator on the front panel display is lit. ) Insert a playable disc. [. . . ]