User manual DAEWOO CMC13103

[. . . ] TV/VCR Combination Unit Owner s Manual CMC13003 IMPORTANT SAFETY INSTRUCTIONS Warning!Important Safety Instructions Save These Instructions Important Safety Information CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product. [. . . ] For this feature to work, the time counter and the letter "M" must still be on the screen. If they are not on screen, press the DISPLAY button until the time counter and the letter "M" appear. The TV/VCR stops the tape when the counter reaches "00:00:00M. " CHAPTER FOUR: VCR 18 With your TV/VCR turned on, and with a tape in the unit, press SPEED. Be sure the record safety tab is in place. For information on the record safety tab, see page 33. 4 1 2 Insert a tape and press PLAY. Press P. PLUS, and "Rental Picture Plus Off" appears on the screen. The Rental Picture Plus functions only when a tape is being played. If the tape is ejected and reinserted, the Rental Picture Plus feature will be OFF. Select the television channel you want by pressing CH or CH or by using the number buttons. If you are using the number buttons to select the channel, press 0 before a single-digit channel number (for channel 5, press 0, 5). The record indicator on the control panel illuminates and the TV/VCR begins recording. The TV/VCR automatically stops recording when it reaches the end of the tape. Don't change tape speeds while recording; this may cause picture distortion during playback. 2 The tape speed appears in the upper left corner of the screen. Press SPEED repeatedly until the speed you want (SLP, SP) appears. SP (Standard Play) is the most common speed for recording. For more information on tape speeds, see page 33. When you finish recording, rewind the tape and remove it from the TV/VCR. OPERATION VCR OPERATION Recording TV Programs as You Watch, continued Editing While Recording You can edit while recording, selecting only those scenes you want to record from the current television program. This is especially helpful if you want to record a program without commercials. 1 Be sure you have begun recording and that the record indicator light on the front panel is lit. After ten minutes in pause mode, the TV/VCR stops the tape automatically and switches to TV mode to protect the video heads. 3 To resume recording, press P. /STILL again. Using Advanced Recording Features One-touch Recording One-touch Recording (OTR) lets you record television programs with the touch of a button. You can program the length of time (up to four hours) that you want to record. 1 Insert a video cassette tape, set the tape speed, and select the channel you want to record. The TV/VCR won't record if the record safety tab on the tape has been removed. For more information, see page 33. 3 2 Press the REC button on the remote control three times. Your recording time options are: 30 minutes, 1 hour, 1 hour and 30 minutes, 2 hours, 3 hours, or 4 hours. Press the REC button on the remote control repeatedly until the time you want appears. You can increase the length of time you want to record at any time during the recording process by pressing the REC button again and choosing additional time. If you want to stop recording before the time is up, press the REC button until the OTR display shows "0:00. " The recording stops after a few seconds. You can also press POWER on the front panel, then press STOP/EJECT. Timer Recording You can set the timer to record up to six different programs. [. . . ] 40 mins. Video Heads · Use a head cleaning tape to remove any dirt that has accumulated on the video heads. · Follow the instructions that come with the cleaning tape; excessive use of a cleaning tape can shorten head life. The Record Safety Tab Most video tapes have a safety tab that must be intact to record. To protect a tape from erasure, you can break off the tab. Liquids Do not handle liquids near or on the TV/VCR. Liquids that spill into it can cause serious damage. Temperature If your TV/VCR is moved from a cold to a warm place, unplug the power cord, and allow at least two hours for moisture that may have formed inside the unit to dry completely. Recording Speeds You can play or record a tape at: · SP (Standard Play) speed · SLP (Super Long Play) speed Your TV/VCR automatically plays tapes at the proper speed. To record on a cassette with the tab removed, cover the hole with cellophane tape. CHAPTER SIX: TROUBLESHOOTING 31 APPENDIX Specifications Format VHS Standard Recording system Rotary, azimuth two-head helical scanning system Luminance: FM azimuth recording Color signal: Converted subcarrier phase shift recording Television system NTSC-type color signal EIA Standard (525 lines, 60 fields) Audio track One track Tape width 12. 7 mm (1/2 inch) Record speed SP: 33. 35 mm/s (1. 31 in. /s) SLP: 11. 12 mm/s (0. 43 in. /s) Record/playback time 480 minutes with T-160 used in SLP mode FF/REW time Less than 100 sec. [. . . ]