User manual DAEWOO 2898ST
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DAEWOO 2898ST. We hope that this DAEWOO 2898ST user guide will be useful to you.
Manual abstract: user guide DAEWOO 2898ST
Detailed instructions for use are in the User's Guide.
[. . . ] Should the fuse require replacement, it must be replaced with a fuse rated at 5 Amp and approved by ASTA or BSI to BS1362. The plug contains a removable fuse cover that must be refitted when the fuse is replaced. In the event of the fuse cover being lost or damaged, the plug must not be used until a replacement not be used until a replacement cover has been obtained. Replacement fuse covers can be purchased from your nearest electrical dealer and must be the same colour as the original. [. . . ] DELETE PROGRAMME POSITION DATA Position the cursor to programme number to delete with the UP/DOWN, LEFT/RIGHT buttons. No. " appear and the "deleted" programme is moved to the programme no. CHANGING THE ORDER OF THE CHANNELS Position the cursor to programme number to move and press the MOVE button. Position the cursor to programme number to exchange and press the MOVE button. ENTER A STATION NAME, CHANGING THE PROGRAMME NUMBER AND COPYING A PROGRAMME You can go to the PRESET menu directly for entering a station name and changing the programme number and copying a programme to another programme no. Refer to the MANUAL CHANNEL SETTING.
EDIT P 00 01 02 03 04 ---------------SKIP NO NO NO NO NO P 05 06 07 08 09 ---------------SKIP NO YES NO NO NO
EDIT P 00 01 02 03 04 ---------------SKIP NO NO NO NO NO DELETE P 05 06 07 08 09 ---------------SKIP NO NO NO NO NO
01
EDIT P 00 ARD 01 ZDF 02 BR3 03 SAT1 04 PR07 SKIP NO NO NO NO NO MOVE P 05 06 07 08 09 06 RTL2 ------------SKIP NO NO NO NO NO
5
MANUAL CHANNEL SETTING
You can also call up the PRESET menu at the MAIN MENU. Press the NUMBER button 0. . 9 or UP/DOWN buttons to select a programme number you want. SEARCHING A CHANNELS Locate a cursor to " " with LEFT/RIGHT button and then press the UP or DOWN button. The tuning screen will appear and the cursor will move from left to right. Pressing and holding down the UP/DOWN button during 2 seconds, the band will change as following: VL-VH-U (For GB, U only). FINE TUNING If you are unable to get a good picture or sound because of a poor broadcasting signal, it is possible to adjust the fine tuning. Move the cursor to and press UP or DOWN button to activate fine tuning up or down. ENTER A STATION NAME Select station name in the station name list with UP/DOWN button and press OK button. If you can't find the desired name in the list, you can enter your own. TO STORE PROGRAMME IN MEMORY Move the cursor to the right end with the LEFT/RIGHT button. Select the programme number that you want to store current displaying programme with station name and system in memory using the UP/DOWN button or NUMBER 0. . 9. Press the OK button.
PRESET
P01
P
SEARCH
PRESET
UHF
>>
P01
P
FINE TUNE
PRESET
UHF
>>
P01
---DRFS BBC1 BBC2 ITU CH4 PRESET
P
P01
BBC1
P
PRESET
P01
BBC1
P02
6
DAILY USE
SELECTING A PROGRAMME NUMBER
The set has a total of 70 programme numbers, 0. . 69. In order to select two-digit programm, press the second numbered button within two seconds. Switch through the programme number step by step with the UP/DOWN button.
VOLUME, PICTURE AND SOUND CONTROL
VOLUME CONTROL Adjust the volume with the VOLUME ( ) DOWN/UP buttons on the front of the set, or with the LEFT/RIGHT button on the remote control. The sound returns if the button is pressed once more or the programme no. NORMAL PICTURE SELECTION When you press the NORMAL button repeatedly you can call up three picture settings; for NORMAL I(hard picture), NORMAL II(soft picture), FAVOURITE (adjustable picture). Use the LEFT/RIGHT button adjust each function: BRIGHTNESS( )-CONTRAST( )-COLOUR( -SHARPNESS( )-TINT( ).
PICTURE 31 63 31 31 00
)
* The TINT is active only in NTSC system. [. . . ] To exit, press SUBPAGE ( ) button again.
9
WATCHING TELEVISION DURING TELETEXT MODE Some pages are continually update, for example, stock market reports, sports announcements, and the latest news. If you want to watch television and stay informed at the same time, press CANCEL ( ) button. The regular programme is still visible and the teletext symbol ( ) appears at the top of the screen. Pressing the CANCEL button again, the teletext page appears with the update information.
REVEAL ANSWER This function can be used on certain pages to reveal the solution of riddles. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DAEWOO 2898ST
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DAEWOO 2898ST will begin.