User manual DA-LITE WB-200
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DA-LITE WB-200. We hope that this DA-LITE WB-200 user guide will be useful to you.
You may also download the following manuals related to this product:
DA-LITE WB-200 SCHEMA 8399 (22 ko)
Manual abstract: user guide DA-LITE WB-200
Detailed instructions for use are in the User's Guide.
[. . . ] Wall Box WB-200
Form E-475 Rev.
Caution: This product is designed for wall installation
only. [. . . ] Use extreme caution when installing the unit post-construction so that no one cuts into existing electric wires, gas lines, water lines or other utilities hidden by the finished wall. -
-
5/16" Hex Driver Drill motor 5/32" Drill bit
For Attaching to Metal Stud: 2. Wall Box should be positioned so it attaches to the back of metal studs. If attaching to the open side of a metal stud, first insert a wooden 2x4 and secure it to the metal stud. The Wall Box may be positioned horizontally between two studs or vertically on one stud. Position the Wall Box on the stud(s) and use the self-drilling screws to secure the Wall Box to the metal stud(s). [. . . ] Peel backing from tape that is on the Trim and apply Trim to a finished wall. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DA-LITE WB-200
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DA-LITE WB-200 will begin.