User manual DA-LITE UPM-1
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DA-LITE UPM-1. We hope that this DA-LITE UPM-1 user guide will be useful to you.
 |
You may also download the following manuals related to this product:
DA-LITE UPM-1 SPECIFICATION DATA (200 ko)
DA-LITE UPM-1 SCHEMA AND PARTS LIST (112 ko)
Manual abstract: user guide DA-LITE UPM-1
Detailed instructions for use are in the User's Guide.
[. . . ] 11 / 08
Caution: This product is designed for ceiling
installation only. [. . . ] As an option, replace the non-secure screws with the 10-24 security screws at this time. See Figure 2.
REPLACE TWO SCREWS
Figure 2
REPLACE FOUR SCREWS
REPLACE ONE SCREW PER SIDE IF USING SECURE SCREWS
4. Loosen the Screws on the bottom portion of the mount to adjust the Leg Assemblies to match the projector mounting holes. Fasten the Feet to the projector with the hardware or security hardware provided. Tighten the fasteners holding the Legs and Feet.
LOOSEN SCREWS TO ADJUST LEGS
LOOSEN THUMB NUTS TO ADJUST FEET
Figure 3
PROJECTOR MOUNTING HOLES
5. Install the support pipe (not included) and attach the Coupling securely. Screw a #10 self-drilling screw into the threaded pipe, through the existing hole in the Coupling to prevent removal of the Coupling. Route power cords and signal cables through the pipe at this time.
1-1/2 PIPE (NOT SUPPLIED)
Figure 4
COUPLING INSTALL COUPLING WITH GROOVE LOW R
7. [. . . ] See Figure 7.
FOUR SCREWS FOR ROLL ADJUSTMENT FOUR SCREWS FOR PITCH ADJUSTMENT
Figure 7 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DA-LITE UPM-1
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DA-LITE UPM-1 will begin.