User manual DA-LITE PWM-AR-1 SPECIFICATION DATA

[. . . ] [. . . ] The mount shall be a fabricated mild steel design and consist of a wall support plate, two articulating arms, tilt channel weldment, tilt plate, rails, hangers, and extensions. The articulating arms shall be 1" x 2" x 14-gauge rectangular steel tubing welded to solid steel pivots. Mount to attach to ___________________ wall construction with 3/8" diameter fasteners and extend up to 27-3/4" from the wall. Mount assemblies shall have a commercial powder coat black or gray finish. The fasteners used to install the mount shall be selected from the following options: 3 /8"x 21/2" hex head lag screws for wood stud structural walls 3 /8"-16 Hollow Set Drop-In with hex head cap screws for solid concrete structural walls 3 /8"-16 Toggler® with hex head cap screws for hollow concrete block and steel stud structural walls Specification Data Model PWM-AR1 Allowable plasma mount points 15/8" - 611/2" horizontal and 0" - 201/2" vertical Monitor Tilt Forward 20° Reach From Wall to Back of Monitor 511/16" to 273/4" Equip Load Rating 130 lbs. Optional Mount Accessories: A101 Hardware Kit Solid Concrete A105 Hardware Kit Wood Stud A109 Hardware Kit Steel Stud, Hollow Concrete Block PW-VC Videoconferencing Shelf PLASMA WALL MOUNT PWM-AR1 1. 63 TO 61. 50 38. 00 0º TO 20º 5. 30 27. 75 1. 02 7. 82 16. 20 22. 00 12. 70 WALL PLATE DETAIL 0. 88 . 039 x 5. 50 SLOT FOR MOUNTING TO WALL 6. 50 RETRACTED EXTENDED 6. 50 16. 00 2/08 [. . . ] [. . . ]