User manual DA-LITE IMAGER

[. . . ] The POWER In PRESENTATION PRODUCTS Instruction Book for DA-LITE SCREEN COMPANY, INC. 3100 North Detroit Street Post Office Box 137 Warsaw, Indiana 46581-0137 Phone: 574-267-8101 800-622-3737 Fax: 574-267-7804 Toll Free Fax: 877-325-4832 www. da-lite. com e-mail: info@da-lite. com IMAGER LARGE WALL BRACKET (47" LONG) Quantities vary by screen size: Screens 80" and smaller viewing width = 1 Screens over 80" to 96" viewing width = 2 Screens over 96" viewing width = 3 QUANTITY INCLUDED __________ Installation screws not included #10 SCREW Quantity = 16 (8 attached to frame) QUANTITY INCLUDED ________ SNAP STUD QUANTITY INCLUDED ________ SMALL WALL BRACKET (8" LONG) Quantity = 1. QUANTITY INCLUDED __________ Installation screws not included CORNER BRACKET Quantity = 4 (attached to frame) QUANTITY INCLUDED ________________________________ USE INSTALLATION METHOD NUMBER __________ INSTALLATION There are three methods of installation based on the size of the screen. [. . . ] You will need at least 5/8" clearance above the bracket to hang the screen. Figures 2, 3, and 4 show the proper orientation for the supplied wall brackets. To install the small wall bracket, you must measure the overall height of the screen frame and subtract 1-3/8". Using that dimension, measure down from the top edge of the wall bracket and mark the wall for two screw holes. Hang the screen on the brackets by hooking the bottom of the frame onto the small wall bracket and lift up until you can hook the top of the frame on the top large bracket. Refer to Figure 4. LARGE WALL BRACKET 1-PIECE FIGURE 2 2 SMALL WALL BRACKET 1-PIECE METHOD 1 (SCREENS 80" AND SMALLER IN VIEWING WIDTH) LARGE WALL BRACKET METHOD 2 (SCREENS OVER 80" UP TO 96" IN VIEWING WIDTH) Method 2 1. The top of the frame will be 1/8" above the top of the large wall bracket when mounted. You will need at least 5/8" clearance above the bracket to hang the screen. Figures 5 and 6 show the proper orientation for the supplied wall brackets. OVERALL HEIGHT OVERALL HEIGHT - 1-3/8" 6" FIGURE 3 3 LARGE WALL BRACKET 2-PIECES 2 LIFT WALL FIGURE 5 1 1 FIGURE 4 WALL OVERALL HEIGHT OVERALL HEIGHT -1/4" 2 FIGURE 6 2. To install the lower wall bracket, you must measure the overall height of the screen frame and subtract 1/4". This is the dimension from the top of the upper wall bracket to the bottom of the lower wall bracket. Position the screen with the attached surface onto the top wall bracket as shown in Figure 6. [. . . ] Position the screen with the attached surface onto the top large wall bracket as shown in Figure 6. Push down at the center of the bottom frame rail to hook onto the lower large wall bracket. 4 Printed in U. S. A. 5 86478 Rev. [. . . ]