User manual DA-LITE FRAMING DATASHEET

[. . . ] REAR PROJECTION SCREENS FRAMING: STANDARD AND BASE FRAMES Frame Cross Section And Size Selection Information: Select the Frame: Standard Frame · Same rugged construction and design as Deluxe Frame, but 2" x 13/4" (50. 8 mm x 45 mm). [. . . ] Specify the Size of Framed Screens: The customer must specify overall size of the frame outside dimension (not size of opening) and must be careful to allow for the space required to fit the factory framed screen into the opening. Framing Detail Factory-Installed Frame: Framed Da-Lite in-wall rear projection screens should be mounted in a vertical position, resting on the bottom of the frame on a suitably reinforced surface in an aperture in a wall or partition. The unit should be shimmed and fixed in position with appropriate moldings to lock the framed panel in position. Da-Lite's Polacoat®, Da-Plex And Da-Glas Screens Factory Framed Screens: · For installation ease, screens are available in factory frames. · All frames are of 6063-T5 aluminum alloy with 204A1R1 black anodized finish. · Easily installed in finished openings by carpenters, framed screens eliminate on-site glazing costs. Shim when necessary. Moldings Moldings 2 x 4 (or larger) Sill (Horizontal) Wall or Partition 2 x 4 Studs or Masonry Wall Standard Frame Da-Plex or Da-Glas Rear Projection Screen Panel Gasket Glass Stop Removable Gasket Glass Stop Fixed Approximate Net Weight Per Linear Foot: 1 lb. [. . . ] (0. 142 kg/m) Frame Size Equals Viewing Area Plus 2-1/2" (63. 5 mm) Vinyl Gasket Viewing Area Is H x W 3/8" 1-1/4" 3/32" Frame Size 7/16" Horizontal Viewing Area 1-1/4" (31. 75 mm) 1-1/4" (31. 75 mm) 1/4" Da-Plex or Da-Glas Rear Projection Screen Panel Tolerance on Frame Size Is ± 1/4" (6. 4 mm) 8 www. da-lite. com · info@da-lite. com [. . . ]