User manual DA-LITE CM-SCP
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DA-LITE CM-SCP. We hope that this DA-LITE CM-SCP user guide will be useful to you.
You may also download the following manuals related to this product:
DA-LITE CM-SCP MANUAL 2 (275 ko)
Manual abstract: user guide DA-LITE CM-SCP
Detailed instructions for use are in the User's Guide.
[. . . ] 11 / 08
Caution: This product is designed for ceiling installation only. [. . . ] Remove existing ceiling tile from suspended ceiling grid and replace with the CM-SCP. Position the CM-SCP with the channel running perpendicular to the purposed television screen or projection screen. The preferred method of attachment is using 3/8" diameter all thread (minimum) and a piece of UnistrutTM channel. NOTE: The load of the CM-SCP and equipment must be carried by the all-thread and NEVER carried by the suspended ceiling grid.
NOT INCLUDED
NOT INCLUDED
CM-SCP
NUT RETAINER
C
B A
E
Figure 1 5. Insert the Nut Retainer Plate into the channel by tilting it on edge and rotating it so that the Nut Retainers are on the topside. Place the CM-USC Weldment on the channel with the guide inside the channel and insert the screws through the CM-USC Weldment and thread them into the Nut Retainer Plates. [. . . ] See Figure 3 for an alternative attaching method.
NOT INCLUDED
NOT INCLUDED CM-SCP
Figure 3 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DA-LITE CM-SCP
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DA-LITE CM-SCP will begin.