User manual DA-LITE A101-4046 PARTS LIST
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DA-LITE A101-4046. We hope that this DA-LITE A101-4046 user guide will be useful to you.
Manual abstract: user guide DA-LITE A101-4046PARTS LIST
Detailed instructions for use are in the User's Guide.
[. . . ] Required Tools:
-
-
9/16" wrench Drill motor Drill bits Hammer
Solid Concrete Hardware Kit A101-4046-4046
1. [. . . ] Drill a 5/8" diameter hole into the concrete wall surface to the screw length. Make sure the threaded cone is snug onto the anchor so that the cone will stay on the anchor during installation. Insert the anchor, cone first, into the hole and tap it in place so that the top edge is flush with the concrete surface. Position the mount and insert the screw to engage the cone and tighten the screw until secure. Pull plastic loop toward yourself so channel is flush behind wall and slide cap down the plastic straps until cap is against the wall. Break plastic straps off at the cap by placing thumb in between the straps and on the cap and sliding thumb side to side. Use a flat washer where applicable.
Figure 3
Metal Joist/Beam Hardware Kit A111
1. Position the mount, insert the screw, thread on nut and tighten until secure. [. . . ] Use a flat washer where applicable.
Figure 3
Metal Joist/Beam Hardware Kit A111
1. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DA-LITE A101-4046
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DA-LITE A101-4046 will begin.