User manual CORBERO CCHV1065HYMFD

[. . . ] Quite primero la lente del cristal y a continuación quite la bombilla. This User Manual contains important safety information and instructions on the operation and maintenance of your appliance. Please take the time to read this User Manual before using your appliance and keep this book for future reference. Meaning Serious injury or death risk Dangerous voltage risk Warning; Risk of fire / flammable materials Injury or property damage risk Operating the system correctly Carefully read all instructions before using your Appliance and keep them in a convenient place for reference when necessary. [. . . ] Static Cooking Function: The oven's thermostat and warning lights will switch on, and the lower and upper The static cooking function emits heat, ensuring even cooking of food. This is ideal for making pastries, cakes, baked pasta, lasagne and pizza. Preheating the oven for 10 minutes is recommended and it is best to use only one shelf at a time in this function. Fan Function: The oven's thermostat and warning lights will switch on, and the upper and lower heating elements and fan will start operating. Lightly brush the wire grid with oil to stop food sticking and place food in the centre of the grid. Always place a tray beneath the food to catch any drips of oil or fat. Warning: When grilling, the oven door must be closed and the oven temperature should be adjusted to 190°C. Vap Clean Function: Set the oven function and thermostat to the Vap Clean function symbol. Pour 200-250ml of water (about 1 cup) into the small tray on the oven base. Vap Clean runs for approximately 20 minutes and will prepare your oven so that it can be easily cleaned. After a few seconds, the dot will stop flashing and will remain illuminated. Cooking time Cooking end time Audible warning time adjustment The audible warning time can be set to any time between 0:00 and 23:59 hours. Following the power connection, the symbol "A" and "000" will flash on the display. Symbol will appear, and the dot in the middle of the screen will start to flash. Select the desired time period using the "+" and "-" keys while The symbol will remain illuminated, the time will be saved and the warning will be set. Adjust the time while the dot is flashing using the "+" and "-" keys. When the timer reaches zero, an audible warning will sound and the symbol will flash on the display. Press any key to stop the audible warning and the symbol will disappear. Semi-automatic time adjustment (cooking period) This function helps you to cook for a fixed period of time. Select the desired cooking function and the temperature using the control knobs. Press "MODE" until you see "dur" and symbol on the display screen. The current time will reappear on the screen, the symbols "A", and will remain illuminated. [. . . ] Insert the new bulb (resistant to 300 °C) to replace the bulb that you removed (230 V, 15-25 Watt, Type E14). The lamp is designed specifically for use in household cooking appliances. It is not suitable for household room 1 Troubleshooting If you still have a problem with your appliance after checking these basic troubleshooting steps, please contact an authorised service person or qualified technician. Also check that other kitchen appliances are No heat or oven does not warm up. [. . . ]