User manual CONTAX RTS III

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · For example, if the equipment is to the right of the TV, move it to the left of the TV. ⷠEnsure that all expansion slots (on the back or side of the equipment) are covered. If these suggestions do not help, consult your equipment dealer or experienced radio/TV technician for help. [. . . ] Flash settings in each mode using the scene button I Some restrictions apply to the flash modes that are available in the shooting modes selected using the scene button I ( p. Scene Mode Standard Sports Action Portrait Night View Night Portrait Macro Landscape Flash Off mode only Auto Flash mode, Flash Off mode only Red-eye Reduction Auto mode Flash Off mode, F Fill-in Flash mode Auto Flash mode, F Fill-in Flash mode Red-eye Reduction Auto mode, Flash Off mode, Available flash modes When taking pictures, refer to the distances shown in the figure at right. Camera shake refers to the effect of images appearing blurred or out of focus because the camera moved when the picture was taken. This is particularly likely to occur at slow shutter speeds and in macro shots. This applies particularly to macro shots with high magnifications, where the subject's depth of field is extremely shallow and even slight camera movements when the shutter release button is pressed can have a large impact on the image. In situations of this sort, place the camera on a stable surface to take the shot. 4-4) also is effective in preventing camera movement when the shutter release button is pressed. The self-timer is used for shots such as those where the photographer is included in the shot. In this mode, the shutter releases either 2 seconds or 10 seconds after the shutter release button is pressed. A self-timer delay of 2 seconds is useful for preventing camera shake when you are using Macro or Night View mode. Switch the camera on and press O or Q on the mode button until the "C", "N" or "M" icon lights on the mode select LED. Switch the camera on and press O or Q on the mode button until the "C", "N" or "M" icon lights on the mode select LED. Press the MENU button K to clear the menu icons and make picture taking easier. The exposure compensation setting does not change after a shot is taken. Exposure compensation when the flash is used is limited to between -1. 4-23) is used, the exposure compensation may differ from the specified setting for some subjects. White balance is the process of ensuring that a white object actually appears white under a given light source. Switch the camera on and press O or Q on the mode button until the "C", "N" or "M" icon lights on the mode select LED. Use L or R on the 4-way button to select WHITE BALANCE [ ] and then press the OK button E. Press the MENU button K to clear the menu icons and make picture taking easier. This setting reverts to the default (AUTO) when the camera is switched off. The frame rate refers to the number of frames shot per second in a movie. [. . . ] In general parlance, when we "change the exposure by 1 step" we are in fact referring to this EV. Exposure This refers to the light of the image projected through the lens striking the camera's CCD or film for the optimum amount of time only. Generally speaking, exposure refers to the combination of shutter speed and aperture setting that will give the correct image. Flash This is a device that produces a bright flash of light by releasing an internally stored highvoltage current. [. . . ]