User manual COMET LABS DS8E07
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual COMET LABS DS8E07. We hope that this COMET LABS DS8E07 user guide will be useful to you.
You may also download the following manuals related to this product:
COMET LABS DS8E07 (204 ko)
Manual abstract: user guide COMET LABS DS8E07
Detailed instructions for use are in the User's Guide.
[. . . ] 3 UNPACKING AND SETUP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 UNPACKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The Switch is ideal for deployment with multiple high-speed servers for shared bandwidth 10Mbps or 100Mbps workgroups. With the highest bandwidth 200Mbps (100Mbps full-duplex mode), any port can provide workstations with a congestionfree data pipe for simultaneous access to the server. As all ports support 200Mbps, the Switch can be cascaded from any port and to any number of switches. The Switch is a perfect choice for site planning to upgrade to Fast Ethernet in the future. Ethernet workgroups can connect to the Switch now, and change adapters and hubs anytime later without needing to change the Switches or reconfigure the network. The Switch combine dynamic memory allocation with storeand-forward switching to ensure that the buffer is effectively allocated for each port, while controlling the data flow between 3
the transmit and receive nodes to guarantee against all possible packet loss. The Switch is a managed 10/100 Fast Ethernet Switch that offers solutions in accelerating small Ethernet workgroup bandwidth. Other key features are: Auto-MDI function supports automatic MDI/MDIX crossover detection function gives true `plug and play' capability without the need of confusing crossover cables or crossover ports. As the result of complete frame checking and error frame filtering, this scheme prevents error packages from transmitting among segments. This allows for autosensing of speed (10/100Mbps) thereby providing you with automatic and flexible solutions in your network connections. This minimizes dropped packets by sending out collision signals when the port's receiving buffer is full. Data filtering/forwarding rate is wire-speed for 10Mbps and 100Mbps speed. 4K MAC address entry table per device with self-learning for the Switch. 128KBytes RAM buffer per device for the Switch.
4
UNPACKING AND SETUP
This chapter provides unpacking and setup information for the Switches.
Unpacking
Open the shipping cartons of the Switch and carefully unpacks its contents. The carton should contain the following items: One 8-port 10/100M NWay Ethernet Switch One external power adapter This User's Guide If any item is found missing or damaged, please contact your local reseller for replacement.
Setup
The setup of the Switch can be performed using the following steps: The surface must support at least 1. 5 Kg for the Switch. Visually inspect the DC power jack and make sure that it is fully secured to the power adapter. Make sure that there is proper heat dissipation from and adequate ventilation around the Switch. Do not place heavy objects on the Switch.
5
IDENTIFYING EXTERNAL COMPONENTS
This section identifies all the major external components of the hub. Both the front and rear panels are shown, followed by a description of each panel feature. The indicator panel is described in detail in the next chapter.
Front Panel
The figure below shows the front panels of the switch.
LED Indicator Panel Refer to the LED Indicator section for detailed information about each of the hub's LED indicators.
Rear Panel
DC Power Jack: Power is supplied through an external AC power adapter. [. . . ] The connection is accomplished from the hub to any of the Switch RJ-45 ports.
A. 10BASE-T Hub
For a 10BASE-T hub, the Switch LED indicators should light up as the following: "Full-Duplex/Collision" indicator is OFF. "100LINK/ACT, 10LINK/ACT LED" indicator is light amber.
B. 100BASE-TX Hub
For a 100BASE-TX hub, the Switch LED indicators should light up as the following: "Full-Duplex/Collision" LED indicator is OFF. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE COMET LABS DS8E07
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual COMET LABS DS8E07 will begin.