User manual CLATRONIC UM 2963 PC 2

[. . . ] Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. the appliance is designed exclusively for private use and for the envisaged purpose. Do not use it outdoors (except if it is designed to be used outdoors). [. . . ] The screw top (7), the knife block (6), sealing ring (5) and the safety ring (4) have to be installed in the correct order (from 7 to 4), see , , Overview of Components". Please ensure that the closed side of the safety ring (4) is facing the carafe and that the screw top is tightly closed. Do not forget to insert the sealing ring as otherwise the carafe will leak. The carafe must be positioned in such a way that the safety ring is in contact with the safety switch (8). Connect the mains lead to a properly installed 230 V, 50 Hz safety power socket. For constant mixing (continuous mode): When operating in levels 1 or 2 snap the selector into the desired position: Level 1 = low rpm Level 2 = high rpm Shift the selector to , , 0" to switch off the appliance. Short-term operation: 1 Minute IMPORTANT NOTE Citrus juices and food containing acids should never be stored in metal vessels. Warning: The electric plug must be removed before the mixer is taken apart!The lids, carafe, safety ring and screw top can be placed in the dishwasher for cleaning. The knife block and sealing ring should only be briefly rinsed off with hot water (Caution: Beware of injury!After cleaning and drying the decanter must be reassembled so that the gasket is located between the blade block and the decanter. See , , Overview of Components" Before using each time the blade block must be screwed securely onto the decanter. Important notice on the safety switch The all-purpose mixer is equipped with a safety switch that avoids that the motor run without the decanter mounted on it (danger of injury!When the container is replaced the safety ring presses on the safety switch of the motor housing. If the safety ring does not press correctly on the safety switch the motor will not start. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. [. . . ] Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. ) as well as cleaning, maintenance or the replacement of said parts are not covered by the guarantee and hence are to be paid!After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs. [. . . ]