User manual CLATRONIC TV 486 DK 2

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CLATRONIC TV 486 DK. We hope that this CLATRONIC TV 486 DK user guide will be useful to you.


CLATRONIC TV 486 DK 2: Download the complete user guide (470 Ko)

Manual abstract: user guide CLATRONIC TV 486 DK2

Detailed instructions for use are in the User's Guide.

[. . . ] Assemble the device in such a way that the available ventilation openings are not covered. Should the device become damaged, in particular the mains supply cable, do not operate the device any longer, but rather have it repaired by an expert. For safety reasons a broken or damaged mains lead may only be replaced by an equivalent lead from the manufacturer, our customer service department or a similary qualified person. [. . . ] If the batteries are inserted the wrong way round, this may destroy the equipment!NOTE: If you do not use the machine for a prolonged period, or operate it using a mains adapter, the batteries should be removed in order to prevent battery acid from leaking!Push the TV/OFF/RADIO switch (located on the right-hand side of the television set) to the TV position. Pull out the telescopic aerial as far as it will go and turn it until you receive the best possible reception. Use the TUNING control located on the right-hand side of the television set to tune in to the desired station. The scale above the screen shows the station to which the television is currently tuned. NOTE: The reception may be impaired through poor reception locations or thick building insulation, etc!You can adjust the volume to your requirements with the VOLUME regulator on the right-hand side of the television set. Picture Adjustment You can adjust the picture to your requirements with the BRIGHT (brightness) and CONT (contrast) controls. If the picture rolls up or down, turn the vertical hold (VHOLD) until the picture comes to a standstill. Turn the TV/OFF/RADIO switch (located on the right-hand side of the television set) to the RADIO position. Pull out the telescopic aerial as far as it will go and turn it until you receive the best possible reception. Push the FM-VHF-LOW/HIGH/AM-UHF switch on the right-hand side of the television set to the desired band range: AM = MW, FM = UKW. Use the TUNING control located on the right-hand side of the television set to tune in to the desired station. NOTE: The reception may be impaired through poor reception locations or thick building insulation, etc!You can adjust the volume to your requirements with the VOLUME regulator on the right-hand side of the television set. Turn the TV/OFF/RADIO switch located on the right-hand side of the television set to the OFF position. Remove the mains adapter from the socket or the car adapter from the cigarette lighter. [. . . ] *) Damage to accessories does not mean automatic free replacement of the whole machine. Broken glass or breakage of plastic parts are always subject to a charge. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE CLATRONIC TV 486 DK




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CLATRONIC TV 486 DK will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.