User manual CLATRONIC TA 2842 DS NEW

[. . . ] Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. the appliance is designed exclusively for private use and for the envisaged purpose. [. . . ] Do not insert forks, knives or other objects in the toasting slot Do not set up the unit next to inflammable objects (e. In order to remove the protective layer on the heating coil you should operate the machine approximately three times when it is empty. Only connect the unit to a properly installed and earthed power socket (230 volts, 50 Hz). To set the browning level, turn the selector clockwise to the preferred level starting from the lightest - level 1 - to the darkest - level 6. Insert the slices of bread in the toasting slot and lower the slide with the lever until it snaps into place. When the set level of browning is reached, the appliance switches off automatically. As the housing and the metal parts become hot during operation, please allow the device to cool down before putting it away. In order to use the special functions, first press down the lever and then the appropriate button ( ), ( ) or ( ). Here only the external heating spirals of the toaster are in operation. The cut surfaces of the roll must face the external sides of the toaster. Pull the mains plug out of the mains socket before you clean the unit and allow the unit to cool down. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. The device supplied by our Company is covered by a 24 month guarantee starting on the date of purchase (receipt). During the life of the guarantee any fault of the device or its accessories *) ascribable to material or manufacturing defects will be eliminated free of charge by repairing or, at our discretion, by replacing it. [. . . ] ) as well as cleaning, maintenance or the replacement of said parts are not covered by the guarantee and hence are to be paid!After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs. [. . . ]