User manual CLATRONIC TA 2630 NEW

[. . . ] Please read the operating instructions carefully before using the appliance. The receipt and if possible the box with inner packaging in a safe place! [. . . ] Special Safety Instructions for this Appliance Only use the appliance if supervised (very dry bread may catch fire if toasted). In order to remove the protective layer on the heating coil you should operate the machine approximately three times when it is empty. This symbol is used to stop toasting This symbol stands for reheating This symbol stands for defrosting Only connect the appliance to a correctly installed safety plug (230 V, 50 Hz). Turn the selector switch clockwise to set the toasting level from the lightest stage 1 to the darkest stage 5. If in any doubt, start with the lower setting (the black mark on the selector switch shows you the setting). Insert sliced bread into the toasting slot and push down the lever until it locks. The appliance switches off immediately once the set degree of toasting has been reached. However, as metal parts still heat up during operation, please allow cooling down before you put it away. If you wish to use the special functions, press the button you wish to select once you have pushed down the lever: REHEAT or DEFROST. Before cleaning, remove the plug from the socket and allow the appliance to cool down. â· Use a moderately damp cloth to clean the outside of the appliance. â· Grasp the crumb shaft by the loop and pull it out, remove the bread residue and push the shaft back in. [. . . ] Motor carbon, mixing hooks, driving belts, spare remote controls, spare toothbrushes, saw blades and such like) and cleaning, maintenance or the replacement of wear parts are not part of the guarantee services and are therefore subject to charge. Repairs can be carried out by licensed dealers or the repair services after the end of the guarantee period, but are subject to charge. [. . . ]