User manual CLATRONIC SRR 616 CD NEW

[. . . ] Assemble the device in such a way that the available ventilation openings are not covered. Should the device become damaged, in particular the mains supply cable, do not operate the device any longer, but rather have it repaired by an expert. For safety reasons a broken or damaged mains lead may only be replaced by an equivalent lead from the manufacturer, our customer service department or a similary qualified person. If the device is not used for a longer period, remove the plug connector from the plug socket or take out the batteries. [. . . ] For VHF/FM mode pull out the telescopic antenna (9) and turn it to improve reception. On this frequency band all programmes are transmitted only in , , mono". Insert a recorded audiocassette into the compartment with the tape opening facing upwards and the side you wish to listen to facing the front (full spool to the right). Always press the í/ stop/eject key (25) when changing the direction or stopping the tape. Insert an audiocassette with the side on which you wish to record facing forwards (full reel on the right). Ensure that the cassette is not copy-protected (the copy protection tab on the top narrow side of the cassette must not have been removed). Select the source from which you wish to record with the function switch (3) and then start playback from this source if necessary. The sound source which you are listening to is the one from which the recording is made. Please press the b record button (21) (the playback button is automatically pressed down at the same time). The recording can be interrupted briefly using the II pause key (26), or stopped by means of the í/ stop/eject button (25). , , - -" appears in the display (19) followed by the number of tracks. If the button is kept pressed down, the machine starts to search through the tracks 7. The I SKIP button (17) can be used as follows: Press once = This starts the current track again from the beginning. If the button is kept pressed down, the machine starts to search through the tracks. To remove a CD, press the CD STOP key (6), open the CD deck with the PUSH/OPEN key (12) and take out the CD carefully. If a reading error has occurred the letters "Er" (Error) appear. By lightly pressing either the SKIP button you can jump one track forwards or backwards. Press three times: The function is deactivated and the CD is played in the normal mode. Programmed Play This can be used to program any desired sequence of tracks. Use the SKIP buttons (15/17) to select the desired track and then press the PROG (5) again. [. . . ] For repairs or replacement during the life of the guarantee return the device in its original packing together with the proof of purchase to your dealer. *) Damage to accessories does not mean automatic free replacement of the whole machine. Broken glass or breakage of plastic parts are always subject to a charge. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]