User manual CLATRONIC SLS 493 NEW

[. . . ] If the device is not used for a longer period, remove the plug connector from the plug socket or take out the batteries. These symbols may be found on the machine and are intended to indicate the following: The lightning symbol should advise the user of parts in the inside of the device which carry dangerously high voltage levels. The symbol with an exclamation mark should advise the user of important operation or maintenance instructions in the accompanying documentation. [. . . ] The built-in safety switches should prevent the user being exposed to dangerous laser light, which is invisible to the human eye, when the CD compartment is opened. Under no circumstances should these safety switches be bypassed or manipulated, as this could result in a danger of exposure to the laser light. Remove all devices from the packing and replace the internal packaging material back in the box. Do not insert the plug of the subwoofer into the socket until all loudspeakers and connections have been correctly made!The red screw connections of the loudspeaker outputs on the subwoofer must be connected to the red sockets of the appropriate loudspeaker!DVD player) R and L: Right and left output for connecting the front loudspeakers (front left channel, front right channel). C: Output for connecting the centre loudspeaker (centre channel) RS and LS: Output for connecting the right and left surround loudspeakers (surround right speaker, surround left speaker) Jack plug as control connection to the central loudspeaker Fine-wire fuse Correct connection is as follows: When you have connected all loudspeakers and devices as described you can insert the mains plug of the subwoofer into a correctly installed 230 volt, 50 hertz power socket. 1 2 3 4 5 6 7 LED central loudspeaker LED front loudspeaker, right Display LED surround loudspeaker, right Connection to the subwoofer LED surround loudspeaker, left LED front loudspeaker, left When the remote control is used, care should be taken that there are no objects between the remote control and the central loudspeaker. These objects prevent the infrared beam of the remote control from reaching the receiver of the central loudspeaker. Use the 7, 12 and 13 keys on the remote control to select the appropriate sound source. With the VOLUME/ADJ control (6) on the remote control you can set the overall volume. By pressing the 2, 3, 4 and 5 keys on the remote control you can select the individual loudspeakers. the loudspeaker that has been selected is shown by a flashing LED (1 , 4 , 7) in the central loudspeaker. Now you can adjust the volume of this loudspeaker with the VOLUME/ADJ control (6). This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. The device supplied by our Company is covered by a 24 month guarantee starting on the date of purchase (receipt). During the life of the guarantee any fault of the device or its accessories *) ascribable to material or manufacturing defects will be eliminated free of charge by repairing or, at our discretion, by replacing it. The guarantee services do not entail an extension of the life of the guarantee nor do they give rise to any right to a new guarantee! [. . . ] The guarantee services do not entail an extension of the life of the guarantee nor do they give rise to any right to a new guarantee!Without proof of purchase no free replacement or repair will be carried out. For repairs or replacement during the life of the guarantee return the device in its original packing together with the proof of purchase to your dealer. [. . . ]