User manual CLATRONIC SB 2530 NEW

[. . . ] Before commissioning this device please read the instruction manual carefully. Please keep these instructions, the guaranty certificate, the sales receipt and, if possible, the carton with the inner packaging! The device is intended exclusively for private and not for commercial use! [. . . ] Under no circumstances must the mains adapter be placed on the edge of the bath, as it could fall into the water and electrocute anyone in the bath. Do not insert the plug of the mains adapter into the power socket until - all accessories are correctly assembled, - the machine is installed in the correct position in the bath, and - you are not yet sitting in the bath!Otherwise hairs, fluff and other small particles may enter the motor compartment and destroy the machine. List of Parts 1 Rotary control 2 Clamp fixing device and adjustable sucker 3 Hose with nozzle 4 Removable filter with cover On and off switch Mains adapter Swivelling nozzle head Movable nozzles DC plug Push the filter with the cover (4) on to the device (see diagram). Place the machine on the edge of the bath so that the filter (4) is immersed in the water and the rotary control (1) can be operated from the top. Press the machine firmly against the edge of the bath so that the suckers adhere firmly to it. Adhesion can be improved if the suckers are moistened a little beforehand. With the rotary control (1) the jet of water at the nozzles (8) can be adjusted (symbol on the left = water jet with many bubbles; symbol on the right = water jet with few bubbles). The nozzle head (7) can be swivelled on the device to the left and to the right. Do not remove the plug of the mains adapter until you have got out of the bath. Operation with Hose Instead of the nozzle head (7), it is also possible to attach the hose. to do so , unscrew the nozzle head from the swivel outlet aperture of the machine. Place the end of the hose with the bayonet catch on the swivel outlet aperture and tighten the hose in a clockwise direction. Before cleaning the machine, always remove the mains plug from the socket and the DC plug (9) from the socket of the mains adapter. [. . . ] The cleaning, servicing and replacement of wear parts are not covered by this warranty and hence are to be paid for. Once the warranty has expired, repairs can be carried out by specialized technicians or repair services against the payment of the service. Pomocí otocného regulátoru (1) mzete nastavit víivý proud na tryskách (8) (symbol vlevo - vodní proud s mnoha vzduchovými bublinkami, symbol vpravo - vodní proud s mensím mnozstvím vzduchových bublinek). [. . . ]